Temperature effect on the thermal-physical properties of fire-protective mineral wool cladding of steel structures under the conditions of fire resistance tests

Authors

  • Serhii Pozdieiev Institute of Public Administration and Research in Civil Protection Rybalska str., 18, Kyiv, Ukraine, 01011, Ukraine https://orcid.org/0000-0002-9085-0513
  • Oleksandr Nuianzin Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034, Ukraine https://orcid.org/0000-0003-2527-6073
  • Olena Borsuk Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034, Ukraine https://orcid.org/0000-0001-5759-4506
  • Oksana Binetska Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034, Ukraine https://orcid.org/0000-0001-6975-1353
  • Andrii Shvydenko Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034, Ukraine https://orcid.org/0000-0002-7708-8595
  • Bogdan Alimov Institute of Public Administration and Research in Civil Protection Rybalska str., 18, Kyiv, Ukraine, 01011, Ukraine https://orcid.org/0000-0003-0248-7003

DOI:

https://doi.org/10.15587/1729-4061.2020.210710

Keywords:

thermal conductivity coefficient, thermal-physical parameters, steel constructions, fire protection cladding, fire protection test

Abstract

The value of the thermal conductivity coefficient depending on the temperature of the samples of steel rod fragments with fire-retardant cladding has been determined in the present research.

The thermal conductivity coefficient of mineral wool fire-retardant cladding was determined; special patterns of its dependence on temperature were revealed. This is explained by the thermal decomposition with the release of thermal energy of inclusions between the fibers of mineral wool and its fibers at a temperature of 750 °C. The apparent minimum of the thermal conductivity factor for fire-retardant mineral wool cladding with a thickness of more than 50 mm is observed at a temperature of about 100 °C. This happens due to the fact that at this temperature the free moisture contained between the fibers of the mineral wool evaporates.

Generalized temperature dependence of the thermal conductivity coefficient of mineral wool fire-retardant cladding has also been derived, in a tabular form. It can be used for calculating the temperature in steel structures with such fire protection. The thickness range for application is up to 80 mm for the specific heat capacity of 1,000 J/(kg °C) and a density of 200 kg/m3.

It is shown how the obtained dependence can be used for predicting heating in steel structures with fire-retardant mineral wool cladding. The relative error between the calculated and experimental data was calculated. The Cochrane, Student, and Fischer criteria for the results of temperature calculation in steel structures with fire-retardant mineral wool cladding between the calculated and experimental data accept values that do not exceed the tabular quantities. This means that the results of the calculation using the obtained temperature dependence of the thermal conductivity coefficient are adequate

Author Biographies

Serhii Pozdieiev, Institute of Public Administration and Research in Civil Protection Rybalska str., 18, Kyiv, Ukraine, 01011

Doctor of Technical Sciences, Professor, Chief Researcher

Oleksandr Nuianzin, Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034

PhD, Associate Professor, Head of Laboratory

Research Laboratory of Innovations in the Field of Civil Safety

Olena Borsuk, Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034

Senior Teacher-Methodologist

Department of Safety of Construction Facilities and Labor Protection

Oksana Binetska, Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034

PhD, Associate Professor

Department of Activity in Special Conditions

Andrii Shvydenko, Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine Onoprienko str., 8, Cherkasy, Ukraine, 18034

PhD, Associate Professor

Department of Organization of Measures of Civil Protection

Bogdan Alimov, Institute of Public Administration and Research in Civil Protection Rybalska str., 18, Kyiv, Ukraine, 01011

Junior Researcher

Department of Fire Protection Systems of the Research and Testing Center

References

  1. Khomenko, O. H. (2018). Stalevi konstruktsii u budivnytstvi. Hlukhiv, 347.
  2. DSTU B V.1.1-17:2007. Vohnezakhysni pokryttia dlia budivelnykh nesuchykh konstruktsiy. Metod vyznachennia vohnezakhysnoi zdatnosti. (ENV 13381-4:2002) (2007). Kyiv: Ukrarkhbudinform, 62.
  3. EN 1993-1-2 (English): Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design [Authority: The European Union Per Regulation 305/2011, Directive 98/34/EC, Directive 2004/18/EC].
  4. Akaa, O. U., Abu, A., Spearpoint, M., Giovinazzi, S. (2016). A group-AHP decision analysis for the selection of applied fire protection to steel structures. Fire Safety Journal, 86, 95–105. doi: https://doi.org/10.1016/j.firesaf.2016.10.005
  5. Wang, Y. C., Kodur, V. K. R. (2000). Research Toward Use of Unprotected Steel Structures. Journal of Structural Engineering, 126 (12), 1442–1450. doi: https://doi.org/10.1061/(asce)0733-9445(2000)126:12(1442)
  6. Bilotta, A., de Silva, D., Nigro, E. (2016). Tests on intumescent paints for fire protection of existing steel structures. Construction and Building Materials, 121, 410–422. doi: https://doi.org/10.1016/j.conbuildmat.2016.05.144
  7. Xue, Y., Zhang, S., Yang, W. (2014). Influence of expanded vermiculite on fire protection of intumescent fireproof coatings for steel structures. Journal of Coatings Technology and Research, 12 (2), 357–364. doi: https://doi.org/10.1007/s11998-014-9626-3
  8. E Silva, V. P., Fakury, R. H. (2002). Brazilian standards for steel structures fire design. Fire Safety Journal, 37 (2), 217–227. doi: https://doi.org/10.1016/s0379-7112(01)00044-3
  9. Pignatta e Silva, V. (2005). Determination of the steel fire protection material thickness by an analytical process – a simple derivation. Engineering Structures, 27 (14), 2036–2043. doi: https://doi.org/10.1016/j.engstruct.2005.05.018
  10. Mohammadi, S., Shariatpanahi, H., Taromi, F. A. (2015). Influence of hybrid functionalized graphite nanoplatelets-tripolyphosphate on improvement in fire protection of intumescent fire resistive coating for steel structures. Polymer Degradation and Stability, 120, 135–148. doi: https://doi.org/10.1016/j.polymdegradstab.2015.06.017
  11. Watolla, M.-B., Gluth, G. J. G., Sturm, P., Rickard, W. D. A., Krüger, S., Schartel, B. (2017). Intumescent geopolymer-bound coatings for fire protection of steel. Journal of Ceramic Science and Technology, 8 (3), 351–364. doi: http://doi.org/10.4416/JCST2017-00035
  12. Yew, M. C., Ramli Sulong, N. H. (2010). Effect of Epoxy Binder on Fire Protection and Bonding Strength of Intumescent Fire Protective Coatings for Steel. Advanced Materials Research, 168-170, 1228–1232. doi: https://doi.org/10.4028/www.scientific.net/amr.168-170.1228
  13. Gardner, L. (2007). Stainless steel structures in fire. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 160 (3), 129–138. doi: https://doi.org/10.1680/stbu.2007.160.3.129
  14. Guoqiang, L. (2000). The development of fire-resistant design method for steel structures. Steel Construction, 3.
  15. Nuianzin, O., Tyshchenko, O., Zhartovskyi, S., Zaika, P., Peregin, A. (2019). The research of carrying capacity of reinforced concrete walls under uneven warming. IOP Conference Series: Materials Science and Engineering, 708, 012063. doi: https://doi.org/10.1088/1757-899x/708/1/012063
  16. Nuianzin, O., Pozdieiev, S., Hora, V., Shvydenko, A., Samchenko, T. (2018). Experimental study of temperature mode of a fire in a cable tunnel. Eastern-European Journal of Enterprise Technologies, 3 (10 (93)), 21–27. doi: https://doi.org/10.15587/1729-4061.2018.131792
  17. EN 1991-1-2:2012: Eurocode 1. Actions on structures – Part 1-2: General actions – Actions on structures exposed to fire Part 1-2: General rules - Structural fire design. Brussels.
  18. Franchuk, A. U. (1969). Tablitsy teplotehnicheskih pokazateley stroitel'nyh materialov. Moscow: NIISF, 142.

Downloads

Published

2020-08-31

How to Cite

Pozdieiev, S., Nuianzin, O., Borsuk, O., Binetska, O., Shvydenko, A., & Alimov, B. (2020). Temperature effect on the thermal-physical properties of fire-protective mineral wool cladding of steel structures under the conditions of fire resistance tests. Eastern-European Journal of Enterprise Technologies, 4(12 (106), 39–45. https://doi.org/10.15587/1729-4061.2020.210710

Issue

Vol. 4 No. 12 (106) (2020): Materials Science

Section

Materials Science

License

Copyright (c) 2020 Serhii Pozdieiev, Oleksandr Nuianzin, Olena Borsuk, Oksana Binetska, Andrii Shvydenko, Bogdan Alimov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.