Redirigiendo al acceso original de articulo en 21 segundos...
Inicio  /  Aerospace  /  Vol: 10 Par: 11 (2023)  /  Artículo
ARTÍCULO
TITULO

Fabrication of a Gd2O3-Based Film to Shield from Space Radiation inside Aircraft and Its Effectiveness

Seon-Chil Kim and Sung-Hwan Kim    

Resumen

Aircraft are exposed to cosmic radiation depending on their flight altitude and latitude. Therefore, flight attendants are exposed to radiation for long periods. In this study, a 0.3 mm thick fabric was designed with which to manufacture crew clothes to shield them against external exposure to space radiation, and the shielding performance was analyzed based on empirical experiments in a real environment. Gadolinium oxide, which has a high neutron reaction cross-section, and tungsten, which is useful for gamma-ray shielding, were proposed as the main raw materials for the shielding fabric, and the shielding performance was evaluated using detectors on Arctic flight routes. Composite (KG-01) and single (KG-02) shielding materials were used. In the case of KG-01, the transmission dose rate was 90.7 ± 5.6% compared with the unshielded case, showing an average space-radiation dose reduction of 9.3%. With KG-02, the transmission dose rate was 103.1 ± 2.0% compared with the unshielded case, and the average dose rate increased by 3.1%; therefore, there was no shielding effect against space radiation. Considering the statistical error of the environmental radiation at aircraft flight altitudes, KG-01 had a shielding effect of at least 5%; however, KG-02 yielded no significant shielding effects.

 Artículos similares

       
 
Keke Song, Xiaoping Zou, Huiyin Zhang, Chunqian Zhang, Jin Cheng, Baoyu Liu, Yujun Yao, Xiaolan Wang, Xiaotong Li, Yifei Wang and Baokai Ren    
The electron transport layer (ETL) is critical to carrier extraction for perovskite solar cells (PSCs). Moreover, the morphology and surface condition of the ETL could influence the topography of the perovskite layer. ZnO, TiO2, and SnO2 were widely inve... ver más
Revista: Coatings

 
Ana-Gianina Gereanu, Camillo Sartorio, Aurelio Bonasera, Giuliana Giuliano, Sebastiano Cataldo, Michelangelo Scopelliti, Giuseppe Arrabito and Bruno Pignataro    
This work deals with the interfacial mixing mechanism of picoliter (pL)-scale droplets produced by sequential inkjet printing of organic-based inks onto ITO/PET surfaces at a moderately high Weber number (~101). Differently from solution dispensing proce... ver más
Revista: Coatings

 
Chen Lin, Teng Zhan, Junxi Wang, Jinmin Li, Zhiqiang Liu and Xiaoyan Yi    
Conventionally, Cu is preferred over Al to fabricate integrated inductors with higher quality factors on either silicon or sapphire substrates, profiting from its lower resistivity. However, after investigating and comparing these two kinds of metal mult... ver más
Revista: Applied Sciences

 
Handan Huang, Li Jiang, Yiyun Yao, Zhong Zhang, Zhanshan Wang and Runze Qi    
The laterally graded multilayer collimator is a vital part of a high-precision diffractometer. It is applied as condensing reflectors to convert divergent X-rays from laboratory X-ray sources into a parallel beam. The thickness of the multilayer film var... ver más
Revista: Coatings

 
Hyeon-Gyu Min, Dong-Joong Kang and Jun-Hyub Park    
In this study, tensile and fatigue tests were performed and analyzed to evaluate an influence of fabrication method on mechanical characteristics of copper thin film which widely used in flexible printed circuit board (FPCB). In general, manufacturing me... ver más
Revista: Applied Sciences