Redirigiendo al acceso original de articulo en 23 segundos...
Inicio  /  Coatings  /  Vol: 8 Núm: 6 Par: June (2018)  /  Artículo
ARTÍCULO
TITULO

Anti- and De-Icing Behaviors of Superhydrophobic Fabrics

Yuyang Liu    
Dong Song and Chang-Hwan Choi    

Resumen

This paper reports the application of superhydrophobic coatings on cotton fabrics and their functionalities for anti- and de-icing efficacy. Superhydrophobic cotton fabrics with different water-repellent properties have been achieved by decorating the surface of pristine cotton fibers with ZnO structures of varying sizes and shapes through an in situ solution growth process, followed by the treatment of the surface with low-surface-energy coating such as Teflon. The surface morphology of the treated cotton fabrics was characterized using scanning electron microscopy (SEM). The surface wettability of the treated fabrics was evaluated through the measurement of static contact angle (SCA), contact angle hysteresis (CAH), and sliding angle (SA) of a water droplet. The anti- and de-icing behaviors of the treated fabrics were evaluated through both static (sessile droplet) and dynamic (spraying) tests. The results show that the superhydrophobic fabric with a higher SCA and the lower CAH/SA has superior anti- and de-icing behaviors in both the static and dynamic conditions. Compared to hard substrates, the soft, flexible, and porous (air-permeable) superhydrophobic fabrics can lead to broader applicability of textile-based materials for the design and fabrication of anti- and de-icing materials. Furthermore, the multi-scale surface structures of fabrics (fibers, yarns, and weaving constructions) combining with the hierarchical micro-nanostructures of the ZnO coating provides an ideal platform for anti-icing studies.

 Artículos similares

       
 
Mitsugu Hasegawa, Haruka Endo, Katsuaki Morita, Hirotaka Sakaue and Shigeo Kimura    
A hybrid anti-/de-icing system combining a superhydrophobic coating and an electrothermal heater is an area of active research for aircraft icing prevention. The heater increases the temperature of the interaction surface between impinging droplets and a... ver más
Revista: Aerospace

 
Richard Hann, Adriana Enache, Mikkel Cornelius Nielsen, Bård Nagy Stovner, Jeroen van Beeck, Tor Arne Johansen and Kasper Trolle Borup    
Atmospheric in-flight icing on unmanned aerial vehicles (UAVs) is a significant hazard. UAVs that are not equipped with ice protection systems are usually limited to operations within visual line of sight or to weather conditions without icing risk. As m... ver más
Revista: Aerospace

 
Abdallah Samad, Eric Villeneuve, Caroline Blackburn, François Morency and Christophe Volat    
Successful icing/de-icing simulations for rotorcraft require a good prediction of the convective heat transfer on the blade?s surface. Rotorcraft icing is an unwanted phenomenon that is known to cause flight cancelations, loss of rotor performance and se... ver más
Revista: Aerospace

 
Eric Villeneuve, Caroline Blackburn and Christophe Volat    
In order to study ice protection systems for rotating blades, a new experimental setup has been developed at the Anti-Icing Materials International Laboratory (AMIL). This system consists of two small-scale rotating blades in a refrigerated icing wind tu... ver más
Revista: Aerospace

 
Abdallah Samad, Eric Villeneuve, François Morency and Christophe Volat    
In-flight icing affects helicopter performance, limits its operations, and reduces safety. The convective heat transfer is an important parameter in numerical icing simulations and state-of-the-art icing/de-icing codes utilize important computing resourc... ver más
Revista: Aerospace