Redirigiendo al acceso original de articulo en 22 segundos...
Inicio  /  Coatings  /  Vol: 7 Núm: 11 Par: Novembe (2017)  /  Artículo
ARTÍCULO
TITULO

Role of Phase Composition of PEO Coatings on AA2024 for In-Situ LDH Growth

Maria Serdechnova    
Marta Mohedano    
Anissa C. Bouali    
Daniel Höche    
Boris Kuznetsov    
Sergey Karpushenkov    
Carsten Blawert and Mikhail L. Zheludkevich    

Resumen

Plasma electrolytic oxidation (PEO) is an environmentally friendly anodizing technique leading to the formation of a ceramic-like coatings under high-voltage discharges. Layered double hydroxides (LDHs) were grown directly on ?, a, and amorphous Al2O3 powders, respectively, in order to investigate the phase responsible for in-situ LDH growth on PEO coating. Furthermore, it is shown that LDH growth is limited by the high tortuosity of the PEO layer and the accessibility of Al ( OH ) 4 - anions from the substrate covered with thin amorphous aluminum oxide, through the pores.

 Artículos similares

       
 
Zhiyuan Hu, Peng Yu, Guohua Xu, Yongjie Shi, Feng Gu and Aijun Zou    
Tiltrotors permit aircrafts to operate vertically with lift, yet convert to ordinary forward flight with thrust. The challenge is to design a tiltrotor blade yielding maximum lift and thrust that converts smoothly without losing integrity or efficiency. ... ver más
Revista: Aerospace

 
Fiza Zafar, Alicia Cordero, Husna Maryam and Juan R. Torregrosa    
Power flow problems can be solved in a variety of ways by using the Newton?Raphson approach. The nonlinear power flow equations depend upon voltages Vi" role="presentation">|????|Vi V i and phase angle δ" role="presentation">??d d . An electri... ver más
Revista: Algorithms

 
Padmanabhan Balasubramanian and Nikos E. Mastorakis    
Multiplication is a fundamental arithmetic operation in electronic processing units such as microprocessors and digital signal processors as it plays an important role in various computational tasks and applications. There exist many designs of synchrono... ver más

 
Cheng-Jian Lin, Chun-Hui Lin and Frank Lin    
The spindle of a machine tool plays a key role in machining because the wear of a spindle might result in inaccurate production and decreased productivity. To understand the condition of a machine tool, a vector-based convolutional fuzzy neural network (... ver más
Revista: Applied Sciences

 
Pureum Kim and Sang-Young Park    
This study investigates the preliminary trajectory design for high-thrust missions to near-Earth asteroids (NEAs), considering distance and phase angle constraints during the approaching phase to enable pre-rendezvous optical navigation and the scientifi... ver más
Revista: Aerospace