Redirigiendo al acceso original de articulo en 16 segundos...
ARTÍCULO
TITULO

Determining the effect of the composition of an aluminosilicate binder on the rheotechnological properties of adhesives for wood

Sergii Guzii    
Pavlo Kryvenko    
Olena Guzii    
Sergey Yushkevich    

Resumen

Main rheotechnological properties of aluminosilicate adhesives for gluing wood arrays have been investigated. It was established that for adhesives based on the alkaline aluminosilicate binding agent with a composition of Na2O×Al2O3×4.5SiO2×17.5H2O dynamic viscosity in the range of speeds from 0 to 200 RPM varies from 6.933 sP to 368.4 Sp, and the mean plastic viscosity takes the magnitude of 86.27 sP. At the same value of surface tension and cohesive work, the smallest angle of wetting (cosQ=0.7973) and the largest coefficients of wetting (s=0.8986) and spreadability (f=?6.5 mN/m), as well as the work of adhesion forces (Wa=58.23 mN/m), wetting (Wa=58.23 mN/m), are demonstrated by beech backing, followed by alder, ash, pine, birch, and oak.For adhesives based on the alkaline aluminosilicate binding agent with a composition of Na2O×Al2O3×6SiO2×20H2O dynamic viscosity in the speed range from 0 to 200 RPM varies from 5.340 sP to 374.4 sP, and the mean plastic viscosity takes the magnitude of 85.72 sP. At the same value of surface tension and cohesive work, the smallest angle of wetting (cosQ=0.5876) and the largest coefficients of wetting (s=0.7938) and spreadability (f=?19.34 mN/m), as well as the work of adhesion forces (Wa=74.46 mN/m), wetting (Ww=27.56 mN/m), are demonstrated by alder backing, followed by pine, oak, birch, beech, and ash.For the adhesive with a composition of Na2O×Al2O3×4.5SiO2×17.5H2O, at low values of shear rate, from 0.0378 to 1.05 1/sec, the shear force increases from 26.21 dyne/cm2 to 48.64 dyne/cm2. The data obtained significantly exceed the same indicators for a liquid glass at high shear rates, from 14 to 39 1/sec. For the adhesive with a composition of Na2O×Al2O3×6SiO2×20H2O, at low shear speeds there is a sharp increase in the shear effort, from 40 to 110 dyne cm2. This is due to the dispersion processes in the silica component. At an increase in the shear speed values from 5 to 42 1/sec, the shear effort increases from 110 to 158 dyne/cm2. This relates to the stabilization of viscosity values with the formation of a homogeneous adhesive structure

 Artículos similares

       
 
Morhaf Aljber, Han Soo Lee, Jae-Soon Jeong and Jonathan Salar Cabrera    
In tsunami studies, understanding the intricate dynamics in the swash area, characterised by the shoaling effect, remains a challenge. In this study, we employed the adaptive mesh refinement (AMR) method to model tsunami inundation and propagation in the... ver más

 
Arvid Åkerblom, Martin Passad, Alessandro Ercole, Niklas Zettervall, Elna J. K. Nilsson and Christer Fureby    
With growing interest in sustainable civil supersonic and hypersonic aviation, there is a need to model the combustion of alternative, sustainable jet fuels. This work presents numerical simulations of several related phenomena, including laminar flames,... ver más
Revista: Aerospace

 
Jingting Li, Ming-Chih Chiu, Xiaowei Lin, Chan Liu, Zhen Tian, Qinghua Cai and Vincent H. Resh    
The species-area relationship (SAR) is a well-established, globally recognized ecological pattern, and research on SAR has expanded to include the phylogenetic diversity-area relationship (PDAR). However, this research has generally been limited to terre... ver más
Revista: Water

 
Donghae Baek, Il Won Seo, Jun Song Kim, Sung Hyun Jung and Yuyoung Choi    
The dispersion coefficients are crucial in understanding the spreading of pollutant clouds in river flows, particularly in the context of the depth-averaged two-dimensional (2D) advection?dispersion equation (ADE). Traditionally, the 2D stream-tube routi... ver más
Revista: Water

 
Guo Li, Yida Teng and Huimin Zhou    
Aero engine compressor disks are typically life-limited parts and it is necessary to secure them through the implementation of an engineering plan and a manufacturing plan. Specifically, the engineering plan recommends the quantification of the safety of... ver más
Revista: Aerospace