Redirigiendo al acceso original de articulo en 20 segundos...
ARTÍCULO
TITULO

RC beams with steel fibers under impact loads - doi: 10.4025/actascitechnol.v36i1.17561

Iana Ingrid Rocha Damasceno    
Muricio de Pina Ferreira    
Dênio Ramam Carvalho de Oliveira    

Resumen

The use of steel fibers as addition improves several mechanical properties of concrete, whose tensile strength and resilience are of great interest for designs of structures subjected to impact loads, such as military facilities, nuclear power plants, bridges and overpasses. However, there are few studies that assessed the effects of adding steel fiber on reinforcements of reinforced concrete. To assess these effects, four concrete beams under impact loads were tested, with reinforcements and different amounts of steel fibers being monitored. The results showed a better performance of beams with fibers, presenting lower strains on reinforcements and cracking.  

 Artículos similares

       
 
Mehmet Alpaslan Köroglu,Ashraf Ashour     Pág. 501 - 512
This paper investigates the properties of self-compacting concrete with waste steel bead wires obtained as a result of the separation of waste tires. Waste steel bead wires were added to concrete between 1% and 5% by weight with an increment of 1%. In to... ver más

 
Tomás Echaveguren,Peter Dechent     Pág. 568 - 578
Prioritization indexes (PI) are a need-based bridge maintenance approach, which allows making short-term maintenance decisions. They generally use just the bridge condition as an explanatory variable, therefore, prioritizing is easy to do. When these ind... ver más

 
Nayra Yumi Tsutsumoto, João Victor Fazzan, José Luiz Pinheiro Melges, Cesar Fabiano Fioriti, Mauro Mitsuuchi Tashima, Jorge Luís Akasaki (Author)     Pág. e36989
 The aim of this paper is to evaluate through bending tests the structural behavior of reinforced concrete beams additionally reinforced with bamboo splints coated with rubber latex. The bamboo splints are prepared from the stems of the Bambusa vulg... ver más

 
Xavier Infant Alex,Kalidas Arunachalam     Pág. 536 - 544
In this research the flexural behavior of lightweight aggregate concrete with inclusion of steel and glass fiber was investigated. Pumice aggregate was used for the replacement of normal weight aggregate to reduce the density of concrete in order to achi... ver más

 
Zhanzhong Yin, Dazhe Feng and Wenwei Yang    
In the current design of steel eccentrically braced frames (EBFs), the yielding link is coupled with the floor beam. This causes the design of cross-sectional dimensions of links to be enlarged, resulting in over-designed structures and foundations, and ... ver más
Revista: Applied Sciences