Redirigiendo al acceso original de articulo en 24 segundos...
Inicio  /  Acta Scientiarum: Technology  /  Vol: 41 Par: 0 (2019)  /  Artículo
ARTÍCULO
TITULO

Use of steel waste for the application in urban paving

Taciano Oliveira da Silva    
Heraldo Nunes Pitanga    
André Luís dos Santos    
Dario Cardoso de Lima    
Ana Cláudia Bernardes Silva    

Resumen

This study evaluated the technical potential of a stabilizer derived from the intimate mixture of steel waste (powder electric arc furnace oxidizing slag - PES) and fly ash to improve soil engineering properties for application in urban paving. This evaluation was performed by laboratory tests to characterize, through CBR tests and unconfined compression tests, the mechanical behavior of compacted residual soil samples of the Alto Paraopeba region, state of Minas Gerais, Brazil, and mixtures of these soils with the stabilizer. For the peculiarities of the research, it was possible to demonstrate the technical viability of the use of steel waste in urban paving works, highlighting the relevance of the proposal in meeting the needs of steel companies to confer a sustainable disposal of waste materials, and the need of municipalities surrounding such companies to providing for, with low-cost materials, significant demands of unpaved road networks.

 Artículos similares

       
 
Mohammad Adhitya,Rolan Siregar,Danardono A Sumarsono,Nazaruddin Nazaruddin,Ghany Heryana,Sonki Prosetyo,Fuad Zainuri     Pág. 6 - 11
Brake failure is one of the causes of fatal accidents because the vehicle cannot be controlled properly. Therefore, research on improving brake safety needs to be assessed immediately. Brake temperature is used as an indicator of brake performance. If th... ver más

 
Oleksij Fomin,Alyona Lovska,Inna Skliarenko,Yurii Klochkov     Pág. 65 - 74
The strength parameters have been determined for the bearing structure of a hopper car used to transport pellets and hot agglomerate. The calculation was based on a finite element method, implemented in the software COSMOSWorks. Strength reserves of load... ver más

 
Josef Machacek, Radek Pichal     Pág. 9 - 16
Stability and strength of imperfect stayed columns are studied in 3D using ANSYS software. Following three tests of stayed columns with a reasonable geometry, the numerical modelling is validated and subsequently compared with available analytical and nu... ver más

 
Josef Machacek, Radek Pichal     Pág. 1 - 10
The efficiency of prestressed stayed elements when designing very slender steel columns was proved for both stability and strength capacity of the columns. With an increasing number of crossarms placed along the length of the column the effectiveness is ... ver más

 
Vitalyi Sakhatsky,Nina Lyubymova,Vitaliy Vlasovets,Vladimir Suponyev,Oleksandr Koval,Artem Naumenko,Tatyana Vlasenko,Yevhenii Chepusenko     Pág. 32 - 40
For laying of underground utility systems in urban conditions by the method of horizontally directed soil piercing, small-sized units are designed. Such units should have measurement systems for determining the spatial position of the piercing head. In k... ver más