Redirigiendo al acceso original de articulo en 24 segundos...
ARTÍCULO
TITULO

A Method for Predicting the Load Interaction between Reinforced Thermoplastic Pipe and Sandy Soil Based on Model Testing

Chuan Wang    
Lianghai Liu    
Ya Zhang and Min Lou    

Resumen

This study aims to investigate the interaction between reinforced thermoplastic pipes (RTPs) and sandy soil. The mechanical properties of sandy soil in the South China Sea region were determined through shear tests to obtain fundamental data. Subsequently, a specialized experimental setup was designed and assembled to study the pipe?soil interaction, specifically measuring the lateral soil resistance of flexible pipes at varying burial depths. Data analysis revealed the relationship between soil resistance, lateral displacement, and initial burial depth. To simulate the mechanical behavior of the pipe?soil interaction, the coupled Eulerian?Lagrangian (CEL) method was employed for numerical simulations. The research findings indicate that the lateral soil resistance is influenced by the uplift height and accumulation width of the soil ahead of the pipe. Within a lateral displacement range of 0.5 times the pipe diameter (0.5D), the lateral soil resistance rapidly increases, resulting in a soil uplift along the circumferential direction of the pipe. This process not only enhances the load-bearing capacity of the pipe but also increases the accumulated soil resistance, consequently expanding the soil failure zone. Furthermore, the ultimate soil resistance exhibits an increasing trend with an increasing burial depth. Once the pipe reaches a certain burial depth, the uplift height of the soil reaches a critical state. To address the grid distortion caused by soil deformation, numerical simulations based on the CEL method effectively modeled the pipe?soil interaction forces under significant lateral displacements, exhibiting good agreement with the experimental results. This study provides a solution for investigating soil resistance in submarine pipelines, thereby contributing significantly to the design and performance prediction of underwater pipelines.

 Artículos similares

       
 
Rui Zhou and Xianghong Xu    
The significant increase in the speed of high-speed trains has made the optimization of pantograph?catenary parameters aimed at improving current collection quality become one of the key issues that urgently need to be addressed. In this paper, a method ... ver más
Revista: Applied Sciences

 
Rui Wang and Guoliang Yu    
In this study, the bedform dimensions of an alluvial bed in a unidirectional flow were experimentally investigated. A series of flume experiments was conducted; 700 sets of flume and field data were used in developing formulae for predicting the bedform ... ver más
Revista: Water

 
Kangshen Xiang, Weijie Chen, Siddiqui Aneeb and Weiyang Qiao    
Future UHBR (Ultra-High Bypass-Ratio) engines might cause serious ?turbine noise storms? but, at present, turbine noise prediction capability is lacking. The large turning angle of the turbine blade is the first major factor deserving special attention. ... ver más
Revista: Aerospace

 
Veenu Tripathi and Stefano Caizzone    
Accurate navigation is a crucial asset for safe aviation operation. The GNSS (Global Navigation Satellite System) is set to play an always more important role in aviation but needs to cope with the risk of interference, possibly causing signal disruption... ver más
Revista: Aerospace

 
Yunfei Yang, Zhicheng Zhang, Jiapeng Zhao, Bin Zhang, Lei Zhang, Qi Hu and Jianglong Sun    
Resistance serves as a critical performance metric for ships. Swift and accurate resistance prediction can enhance ship design efficiency. Currently, methods for determining ship resistance encompass model tests, estimation techniques, and computational ... ver más