Resumen
This paper describes a simple and low-cost process for the degradation of 4-Chlorophenol (4-CP) from aqueous solution, using natural Tunisian Hematite (M1) and Siderite (M2). Two natural samples were collected in the outcroppings of the Djerissa mining site (Kef district, northwestern Tunisia). Both Hematite and Siderite ferrous samples were characterized using several techniques, including X-Ray Diffraction (XRD), Nitrogen Physisorption (BET), Infrared Spectroscopy (FTIR), H2-Temperature Programmed Reduction (H2-TPR), Scanning Electronic Microscopy (SEM) linked with Energy Dispersive X-ray (EDS) and High-Resolution Transmission Electron Microscopy (HRTEM). Textural, structural and chemical characterization confirmed the presence of Hematite and Siderite phases with a high amount of iron on the both surface materials. Their activity was evaluated in the oxidation of 4-CP in aqueous medium under heterogeneous photo-Fenton process. Siderite exhibited higher photocatalytic oxidation activity than Hematite at pH 3. The experimental results also showed that 100% conversion of 4-CP and 54% TOC removal can be achieved using Siderite as catalyst. Negligible metal leaching and catalyst reutilization without any loss of activity point towards an excellent catalytic stability for both natural catalysts.