Redirigiendo al acceso original de articulo en 16 segundos...
Inicio  /  Applied Sciences  /  Vol: 12 Par: 20 (2022)  /  Artículo
ARTÍCULO
TITULO

Test Stand for a Motor Vehicle Powered by Different Fuels

Dawid Tatarynow    
Rafal Longwic    
Przemyslaw Sander    
Lukasz Zielinski    
Michal Trojgo    
Wincenty Lotko and Pawel Lonkwic    

Resumen

This article discusses current testing methods for motor vehicle engines. Traction engines have so far been tested, for example, according to WLTP (Worldwide Harmonized Light Vehicle Test Procedure) driving tests, but due to the ?VW?gate? incident, these are now to be supplemented by RDE (Real Driving Emissions) tests, conducted under real road conditions. The analyses of the state of knowledge and the directions of research to date unequivocally indicate the need for the construction of a stand that allows: testing of a complete vehicle admitted to traffic; testing of a motor vehicle with the possibility of simulating real operating conditions; load setting with the possibility of its regulation; feeding the engine with various fuels; modification of the software of controllers having a direct impact on the control strategies of the engine; transmission and traction control system; reading, recording and analysis of the parameters of the operation of control systems in real time; detailed recording and analysis of the combustion process occurring directly in the combustion chamber; and the measurement of emitted toxic substances. On a bench with the above features, tests were carried out on a diesel motor vehicle, which were based on recording changes in the parameters of the combustion and injection process. The tests were conducted under static and dynamic conditions. Tests under static conditions were conducted on a chassis dynamometer. They consisted of indicating the engine for different fuel dose control maps. The vehicle equipped with the test engine was driven at a constant speed on the chassis dynamometer and loaded with a drag force of 130 Nm. Tests under dynamic conditions were conducted under real traffic conditions. They were limited to the presentation of results under static conditions. The main results of the tests are given in the conclusion and include a general summary. In particular, the presented results of the diesel tests demonstrate an attempt to adapt the engine to co-power with hydrogen.

 Artículos similares

       
 
Farouk Smith and Jieun Bae    
This paper presents the design and development of a sub-joule micro-Pulsed Plasma Thruster (µPPT) as a possible low-cost propulsion solution for Pocket-Cubes, used to increase its reliability, capability, and lifetime. It is shown that the µPPT successfu... ver más
Revista: Aerospace

 
Naomi Y. Mbelekani and Klaus Bengler    
Learnability in Automated Driving (LiAD) is a neglected research topic, especially when considering the unpredictable and intricate ways humans learn to interact and use automated driving systems (ADS) over the sequence of time. Moreover, there is a scar... ver más
Revista: Information

 
Jaroslaw Chodór, Leon Kukielka, Grzegorz Chomka, Lukasz Bohdal, Radoslaw Patyk, Marek Kowalik, Tomasz Trzepiecinski and Andrii M. Radchenko    
This article concerns the application of the FEM method for the prediction of stress and deformation states in the workpiece during diamond sliding burnishing (DSB). An updated Lagrange (UL) description was used to describe the phenomena at a typical inc... ver más
Revista: Applied Sciences

 
Agata Kusmierek, Rafal Grzeszczyk, Andreas Strohmayer and Cezary Galinski    
Given the increase in air traffic, the main challenges in aircraft design are in-flight emissions and noise heard by the community. These problems have thus far been solved by incremental improvements in aerodynamics, engine technology and operation. To ... ver más
Revista: Aerospace

 
Shirin M. Usmani, Linn Voss, Ina Stephan, Thomas Hübert and Erhard Kemnitz    
Low-water soluble metal fluorides such as magnesium fluoride (MgF2) and calcium fluoride (CaF2) were evaluated for decay protection of wood. Initially, the biocidal efficacy of nano metal fluorides (NMFs) against wood destroying fungi was assessed with a... ver más
Revista: Applied Sciences