Redirigiendo al acceso original de articulo en 17 segundos...
ARTÍCULO
TITULO

Study of Crack Closure Effect of Hull Plate under Low Cycle Fatigue

Qin Dong    
Mengyuan Rong and Geng Xu    

Resumen

The crack closure phenomenon significantly influences low cycle fatigue (LCF) crack growth. The crack closure theory deems that a crack can grow only when the applied load is greater than the fatigue crack opening and closing loads. The revised crack closure theory proposed in this paper provides a new understanding of crack growth: It is no longer the range of stress intensity factor ?K that controls the crack growth rate, but the effective stress intensity factor ?Keff. Therefore, it is of great importance to study the crack closure phenomenon of LCF. A combination of experiments and the finite element method (FEM) was used to study the effect of overload on the crack closure effect, and the study was carried out using compact tensile (CT) specimens made of AH32 steel. The FEM was used to obtain the stress changes near the crack tip and the opening displacement changes in the crack trailing area after a single tensile overload, to study the intrinsic mechanism of overload on crack closure, and to obtain the LCF crack opening and closing loads by the nodal displacement method. The effect of overload on crack morphology was observed by using high-magnification electron microscopy in combination with testing.

 Artículos similares

       
 
Xiaoyu Tang, Wen Wan, Zhenxing Lu and Wei Chen    
To investigate the influence of non-singular terms (T stress) in the stress field on the composite fractures of hard rock Type I?II, such as rock splitting failure and hydraulic fracture propagation, this study focused on hard rocks in metallic mines. Th... ver más
Revista: Applied Sciences

 
Dong Liu, Mengli Wu and Dimitri Donskoy    
This study investigates the application of Ultrasonic Pulse Velocity (UPV) for crack depth estimation in cylindrical structures, focusing on two approaches: reference measurement and dual measurement. It addresses the challenge of applying UPV to curved ... ver más
Revista: Acoustics

 
Yahya Ali Fageehi and Abdulnaser M. Alshoaibi    
The primary focus of this paper is to investigate the application of ANSYS Workbench 19.2 software?s advanced feature, known as Separating Morphing and Adaptive Remeshing Technology (SMART), in simulating the growth of cracks within structures that incor... ver más
Revista: Applied Sciences

 
Hongzhang Pan, Yongmei Zhu and Mingjiang Fang    
Maraging steel is the material of deep sea pressure equipment. The characteristics of corrosion fatigue crack initiation in 18Ni (250) were investigated by performing a tensile fatigue test under different loading conditions. The mechanism of corrosion f... ver más

 
Sadiq Gbagba, Lorenzo Maccioni and Franco Concli    
In the shipbuilding, construction, automotive, and aerospace industries, welding is still a crucial manufacturing process because it can be utilized to create massive, intricate structures with exact dimensional specifications. These kinds of structures ... ver más
Revista: Applied Sciences