Redirigiendo al acceso original de articulo en 15 segundos...
Inicio  /  Applied Sciences  /  Vol: 9 Par: 8 (2019)  /  Artículo
ARTÍCULO
TITULO

Monitoring the Dynamic Response of a Buried Polyethylene Pipe to a Blast Wave: An Experimental Study

Dongwang Zhong    
Xiangchao Gong    
Fang Han and Linna Li    

Resumen

Although the use of polyethylene (PE) pipelines has become increasingly widespread in recent years, few studies have addressed their seismic design and ability to withstand blast waves. In order to establish their seismic capacity, the dynamic response of buried pipelines subjected to blast waves must be explored in depth. Here, we studied the dynamic response of PE pipes situated near an explosive source. Time histories of dynamic strains were measured by conventional strain gauges after simple waterproof treatment, and pipe and ground vibration velocity curves were obtained. Based on the experimental data, the attenuation law of the peak strains under the conditions of different charge masses and blast center distances was analyzed, and the spectrum characteristics of strain, velocity of the pipe, and ground velocity were studied. The results revealed that a large hoop strain on the PE pipes was produced due to the local impact near the explosive source. We found that peak hoop strain (PHS) or peak axial strain (PAS) had a power attenuation relationship with the scaled distance, and this relationship could also be derived by dimensional analysis. The average frequency of strains had the same attenuation form as the charge mass, which was between 10 Hz and 50 Hz. Additionally, the vibration of the pipe showed a low frequency. We also determined that the attenuation of the average frequency of pipe and ground vibration velocity was closely related to the charge mass and the scaled distance. Pipe peak vibration velocity (PPVV), ground peak particle velocity (GPPV), and the peak dynamic strain of pipe were highly positively correlated, which verifies the feasibility of using GPPV to characterize pipeline vibration and strain level. Thus, a blasting criterion of 10% minimum request strength (MRS) for PE pipe was proposed, which means that the additional PHS or PAS of the dangerous point must be less than 10% MRS, and we also propose limiting the safety distance?charge mass for blasts near buried PE pipelines by the criterion. Some results in this paper can serve as the basis for future in-depth theoretical research.

 Artículos similares

       
 
Mihai Crengani?, Radu-Eugen Breaz, Sever-Gabriel Racz, Claudia-Emilia Gîrjob, Cristina-Maria Biri?, Adrian Maro?an and Alexandru Bârsan    
This scientific paper presents the development and validation process of a dynamic model in Simulink used for decision-making regarding the locomotion and driving type of autonomous omnidirectional mobile platforms. Unlike traditional approaches relying ... ver más
Revista: Applied Sciences

 
Mengzhen Wu, Xianghong Xu, Haochen Zhang, Rui Zhou and Jianshan Wang    
As a traditional numerical simulation method for pantograph?catenary interaction research, the pantograph?catenary finite element model cannot be applied to the real-time monitoring of pantograph?catenary contact force, and the computational cost require... ver más
Revista: Applied Sciences

 
Ji-Woon Lee and Hyun-Soo Kang    
The escalating use of security cameras has resulted in a surge in images requiring analysis, a task hindered by the inefficiency and error-prone nature of manual monitoring. In response, this study delves into the domain of anomaly detection in CCTV secu... ver más
Revista: Applied Sciences

 
Yadong Zhou, Zhenchao Teng, Linlin Chi and Xiaoyan Liu    
Based on the unit life and death technology, the dynamic evolution process of soil loss is considered, and a pipe-soil nonlinear coupling model of buried pipelines passing through the collapse area is constructed. The analysis shows that after the third ... ver más
Revista: Applied Sciences

 
Daniel Jancarczyk, Ireneusz Wróbel, Piotr Danielczyk and Marcin Sidzina    
Vibration monitoring is essential for maintaining the optimal performance and reliability of industrial machinery, which experiences dynamic forces and vibrations during operation. This study delved into a comprehensive analysis of vibration monitoring i... ver más
Revista: Applied Sciences