Redirigiendo al acceso original de articulo en 18 segundos...
Inicio  /  Information  /  Vol: 14 Par: 4 (2023)  /  Artículo
ARTÍCULO
TITULO

Optimal Load Redistribution in Distribution Systems Using a Mixed-Integer Convex Model Based on Electrical Momentum

Daniela Patricia Bohórquez-Álvarez    
Karen Dayanna Niño-Perdomo and Oscar Danilo Montoya    

Resumen

This paper addresses the problem concerning the efficient minimization of power losses in asymmetric distribution grids from the perspective of convex optimization. This research?s main objective is to propose an approximation optimization model to reduce the total power losses in a three-phase network using the concept of electrical momentum. To obtain a mixed-integer convex formulation, the voltage variables at each node are relaxed by assuming them to be equal to those at the substation bus. With this assumption, the power balance constraints are reduced to flow restrictions, allowing us to formulate a set of linear rules. The objective function is formulated as a strictly convex objective function by applying the concept of average electrical momentum, by representing the current flows in distribution lines as the active and reactive power variables. To solve the relaxed MIQC model, the GAMS software (Version 28.1.2) and its CPLEX, SBB, and XPRESS solvers are used. In order to validate the effectiveness of load redistribution in power loss minimization, the initial and final grid configurations are tested with the triangular-based power flow method for asymmetric distribution networks. Numerical results show that the proposed mixed-integer model allows for reductions of 24.34% 24.34 % , 18.64% 18.64 % , and 4.14% 4.14 % for the 8-, 15-, and 25-node test feeders, respectively, in comparison with the benchmark case. The sine?cosine algorithm and the black hole optimization method are also used for comparison, demonstrating the efficiency of the MIQC approach in minimizing the expected grid power losses for three-phase unbalanced networks.

 Artículos similares

       
 
Ping Xiao and Haiyan Wang    
In response to the optimal operation of ocean container ships, this paper presents a two-level planning model that takes into account carbon tax policies. This model translates the CO2 emissions of ships into carbon tax costs and aims to minimize the ove... ver más
Revista: Applied Sciences

 
Zhao Ma, Junjie Ye, Xin Zhang and Wenhua Ye    
To analyze the rock-breaking characteristics of an arcing-blade cutter in cutting red sandstone, a two-cutter cutting model was established based on the finite element method. Then, the cutting processes of the arcing-blade cutter at penetrations of 2 mm... ver más
Revista: Applied Sciences

 
Jianfeng Zhu, Guochen Huang, Maoguang Xu, Ming Liu, Bo Diao and Po Li    
Combined with the development trend of high speed generators and the high voltage of DC microgrids in high-power series hybrid aero propulsion system, a set of hybrid systems with a power of 200 kW, voltage of 540 V, and speed of 21,000 r/min is establis... ver más
Revista: Aerospace

 
Shiji Zhou, Shengfeng Zhao, Chuangxin Zhou, Yunfeng Wu, Hang Yuan and Xingen Lu    
To explore the internal flow mechanism and improve the performance of a supersonic compressor, an efficient global optimization design method was developed for an axial flow compressor and applied in the optimization design of a prototype supersonic comp... ver más
Revista: Aerospace

 
Songkai Liu, Jinkui Chu and Yuanyu Wang    
Aviation components play an important role in national defense and aviation development. Bolt connections are widely used in the assembly of aviation components, due to their simple structure and convenient disassembly. In addition to the impact of elast... ver más
Revista: Applied Sciences