Redirigiendo al acceso original de articulo en 18 segundos...
ARTÍCULO
TITULO

Technology of obtaining water-soluble surface-active substances by the method of phenol sulfomethylation

Nadiia Sokolenko    
Yevgeniy Popov    
Kateryna Fastovetska    

Resumen

The object of this study is a technology of the new surface-active substances (SAS) based on sulfomethylated phenol. The study's aim was to improve the technology by a catalytic method, implying the development of industrial schemes for the synthesis processes.During phenol sulfomethylation, the active conversion of monomers into polymeric substances starts only at a temperature of 110?120 °C; the surface-active substances with an optimal polymeric composition were obtained only at a temperature of 130 °C. In the reaction of phenol sulfomethylation in a water environment at a temperature below 90 °C, obtaining SAS with the required properties takes more than 9 hours. The significant disadvantages of this technique are the relatively low yield of the target product and a significant amount of free phenol in the finished product (over 15 percent).It is known that a more powerful and less risky technique to accelerate the reaction than rising the temperature is catalysis.This study investigated the reaction of phenol sulfomethylation under conditions of interphase catalysis. This has made it possible to improve the main technological parameters: the reaction temperature was reduced from 130 °C to 90 °C, the process duration was shortened to 3 hours, to process was conducted at atmospheric pressure. The catalyst used was a cation-active SAS: cetyltrimethylammonium bromide. This makes it possible to simplify the technological scheme of obtaining SAS, that is, to use less energy-intensive and cheap reactors.A benefit of the proposed technology is the low-waste, single-stage production, and the use of available raw materials: phenol, formaldehyde, and sodium sulfite. During the study, the products were obtained that are similar, in terms of the surface-active properties, to the NF Dispersant, which is widely used in the industry. This makes it possible to expand the range of multifunctional surface-active substances with better bio destruction than products based on naphthalene and lignin.According to the results of studying the samples obtained, the scope of their application has been proposed. The resulting products have been tested, with positive results, as the anion-active SAS, used as dispersants in the production of organic dyes, as aligners when dyeing textiles, and as plasticizing additives for concrete mixtures

 Artículos similares

       
 
Aitbek Kakimov,Baktybala Kabdylzhar,Zhanibek Yessimbekov,Anuarbek Suychinov,Asemgul Baikadamova     Pág. 6 - 12
This paper describes a technology for obtaining a homogeneous meat and bone paste made through a multi-stage grinding at a chopper grinder and the micro-grinder "Supermasscolloider". The relevance of the study relates to that the meat and bone raw materi... ver más

 
Olena Kovaliova,Yuriy Tchoursinov,Viktoriia Kalyna,Vitalii Koshulko,Ekaterina Kunitsia,Anton Chernukha,Oleg Bezuglov,Oleg Bogatov,Dmytro Polkovnychenko,Natalia Grigorenko     Pág. 61 - 68
The study reported here has established patterns in the intensive technology for making a biologically active component (the sprouts of legumes) whose germination involved natural fruit acids (citric, malic, grape). The choice of high-quality and safe st... ver más

 
Viktor Bokov,Oleh Sisa,Volodymyr Mirzak,Olha Medvedieva     Pág. 60 - 72
A process has been developed to press fuel briquettes from autumn leaves. It has been shown that a spherical shape of a briquette is optimal since even dense packing of balls provides air access to each individual ball. This is especially important in th... ver más

 
Nataliya Grynchenko,Olga Tishchenko,Olga Grynchenko,Pavlo Pyvovarov     Pág. 13 - 23
This paper reports the development of technological principles for making granulated fillers. Our study involved model systems (granules), which has made it possible to determine the conditions for forming alginate-calcium complexes. It has been establis... ver más

 
Olena Shydakova-Kameniuka,Oleksii Shkliaiev,Olga Samokhvalova,Maya Artamonova,Galyna Stepankova,Olena Bolkhovitina,Alla Rogova     Pág. 52 - 60
The technological properties of chia seeds have been studied. It has been established that the degree of their swelling depends on the type of a medium (water, albumin solution, fat) and the state of seeds (whole seeds or ground seeds). It was noted that... ver más