Redirigiendo al acceso original de articulo en 18 segundos...
ARTÍCULO
TITULO

Modeling of the Rheological Properties of Asphalt Binder and Asphalt Mortar Containing Recycled Asphalt Material

C. Riccardi    
A. Cannone Falchetto    
M. Losa    
M. Wistuba    

Resumen

The use of recycled materials in asphalt pavements increased significantly over the years, determining well known environmental and economic benefits. Many research agencies and road authorities evaluated the impact of Recycled Asphalt Pavement (RAP) on pavement performance. Nevertheless, the mechanism governing the interaction between virgin asphalt binder and aged RAP binder is not well understood. In this paper, the effect of RAP on the rheological properties of asphalt binders and mortars is experimentally evaluated, and theoretically modeled with the objective of defining a relationship between the linear viscoelastic (LVE) properties of binders and those of the corresponding mortars. Three asphalt binder types, obtained by blending a hard and a soft binder at three different percentages, were mixed with three different contents of a Selected fraction of Recycled Asphalt Pavement, called SRAP, for preparing the asphalt mortar samples. Dynamic Shear Rheomether tests were performed on binders and mortars to determining the complex modulus over a wide range of temperatures and frequencies. The rheological properties of the compound of virgin and RAP binder were evaluated by using a new approach based on a modified version of the Nielsen model, avoiding the extraction and recovery method. The results were then modelled by using the analogical 2S2P1D model, consisting of one spring, two parabolic and one-dashpot elements combined in series and then assembled together with a second spring in parallel. Based on test results, a simple experimental relationship between the characteristic times of the binder and the percentage of RAP in the mortar was found.

 Artículos similares

       
 
Seyed Amirhossein Hosseini, Ahmad Alhasan and Omar Smadi    
This paper describes the process and outcome of deterioration modeling for three different pavement types (asphalt, concrete, and composite) in the state of Iowa. Pavement condition data is collected by the Iowa Department of Transportation (DOT) and sto... ver más
Revista: Infrastructures

 
Jing Zhao, Dan B. Marghitu, John Schumacher and Wenzhong Wang    
This study aimed to investigate the impact of a horse hoof wall on three solid surfaces: steel, concrete and asphalt. Impact experiments were conducted for different impact angles and different initial impact velocities. The effect of impact surfaces, im... ver más
Revista: Applied Sciences

 
Parnian Ghasemi, Mohamad Aslani, Derrick K. Rollins and R. Christopher Williams    
The dynamic modulus of hot mix asphalt (HMA) is a fundamental material property that defines the stress-strain relationship based on viscoelastic principles and is a function of HMA properties, loading rate, and temperature. Because of the large number o... ver más
Revista: Infrastructures

 
Kiplagat Chelelgo, Zachary C. Abiero Gariy and Stanley Muse Shitote    
Emulsion asphalts are cost-effective, environmentally friendly, and sustainable alternatives to hot-mix asphalts. Laboratory curing protocols currently used to simulate field curing of emulsion asphalts have been observed to offer conflicting predictions... ver más
Revista: Applied Sciences

 
Sérgio Pacífico Soncim, Igor Castro Sá de Oliveira, Felipe Brandão Santos (Author)     Pág. e35626
The objective of this paper was to develop fuzzy models for asphalt pavement performance. The fuzzy logic can convert linguistic or qualitative variables into quantitative values. This feature makes possible the gathering of experts? experience about the... ver más