Resumen
Chatter is more likely to occur during the turning process of a thin-walled cylindrical workpiece owing to the low rigidity of such workpieces. Chatter causes intensive vibration, deterioration of the surface finish accuracy, tool damage, and tool wear. Tuned mass dampers (TMD) are usually applied as a passive damping technique to induce a large damping effect using a small mass. This study experimentally investigated the effect of the mounting arrangement and tuning parameters of the TMDs on the production of chatter during the turning process of a thin-walled cylinder, wherein multiple TMDs with extremely small mass ratios were attached to the rotating workpiece. The results of the cutting tests performed by varying the circumferential and axial mounting positions of the TMDs exhibited different characteristics of the chatter suppression effect. Conclusively, the TMDs could suppress the chatter generated by the vibration mode with circumferential nodes if they were mounted on the workpiece to avoid the coincidence of the circumferential arrangement with the pitch of the vibration nodes, regardless of the extremely small mass of the TMDs.