Inicio  /  Acoustics  /  Vol: 2 Par: 3 (2020)  /  Artículo
ARTÍCULO
TITULO

Identification of Noise Sources in a Realistic Turbofan Rotor Using Large Eddy Simulation

Pavel Kholodov and Stéphane Moreau    

Resumen

Large Eddy Simulation is performed using the NASA Source Diagnostic Test turbofan at approach conditions (62% of the design speed). The simulation is performed in a periodic domain containing one fan blade (rotor-alone configuration). The aerodynamic and acoustic results are compared with experimental data. The dilatation field and the dynamic mode decomposition (DMD) are employed to reveal the noise sources around the rotor. The trailing-edge radiation is effective starting from 50% of span. The strongest DMD modes come from the tip region. Two major noise contributors are shown, the first being the tip noise and the second being the trailing-edge noise. The Ffowcs Williams and Hawkings? (FWH) analogy is used to compute the far-field noise from the solid surface of the blade. The analogy is computed for the full blade, for its tip region (outer 20% of span) and for lower 80% of span to see the contribution of the latter. The acoustics spectrum below 6 kHz is dominated by the tip part (tip noise), whereas the rest of the blade (trailing-edge noise) contributes more beyond that frequency.

 Artículos similares

       
 
Lingqi Kong and Shengquau Liu    
With the development of the Internet, vast amounts of text information are being generated constantly. Methods for extracting the valuable parts from this information have become an important research field. Relation extraction aims to identify entities ... ver más
Revista: Applied Sciences

 
Gursu Gurer, Yaser Dalveren, Ali Kara and Mohammad Derawi    
The automatic dependent surveillance broadcast (ADS-B) system is one of the key components of the next generation air transportation system (NextGen). ADS-B messages are transmitted in unencrypted plain text. This, however, causes significant security vu... ver más
Revista: Aerospace

 
Rong Wang, Xinyang Zhou, Yi Liu, Dongqi Liu, Yu Lu and Miao Su    
To ensure the safety and durability of concrete structures, timely detection and classification of concrete cracks using a low-cost and high-efficiency method is necessary. In this study, a concrete surface crack damage detection method based on the ResN... ver más
Revista: Applied Sciences

 
Shanshan Chen, Sheng Guan, Hui Wang, Ningqi Ye and Zexun Wei    
Ship type identification is an important basis for ship management and monitoring. The paper proposed a new method of ship type identification by combining characteristic parameters from the energy difference between high and low frequencies and the sens... ver más

 
Wenbo He, Xiaoqiang Zhang, Zhenyu Feng, Qiqi Leng, Bufeng Xu and Xinmin Li    
Dynamic load identification plays an important role in the field of fault diagnosis and structural modification design for aircraft. In conventional dynamic load identification approaches, accurate structural modeling is usually needed, which is difficul... ver más
Revista: Aerospace