Inicio  /  Buildings  /  Vol: 12 Par: 7 (2022)  /  Artículo
ARTÍCULO
TITULO

Effect of Hot Mixing Duration on Blending, Performance, and Environmental Impact of Central Plant Recycled Asphalt Mixture

Jie Gao    
Yuquan Yao    
Jinhua Huang    
Jiangang Yang    
Liang Song    
Jing Xu and Xinhu Lu    

Resumen

When using a high concentration of reclaimed asphalt pavement (RAP) in a recycled hot-mix asphalt mixture (RHMA), the degree of blending of the reclaimed asphalt binder significantly affects the performance of the RHMA. Hence, it is essential to know the degree of blending of the RAP and its effect on the performance and the environmental impact of RHMA in order to determine the optimal mixing duration. To this end, the dispersion of reclaimed asphalt was observed using artificial RAP and the image analysis method, and the blending of reclaimed asphalt in RHMA with different mixing durations was also evaluated using physical properties tests, a rheometer test, a Fourier-transform infrared spectroscopy (FTIR) test, a gel permeation chromatography (GPC) test, and an atomic force microscope (AFM) test. The performance of RHMA with the different mixing durations in the plant and in the laboratory was tested using a Marshall stability test, rutting resistance test, freeze?thaw splitting test, and low-temperature bending beam test. In addition, the environmental impact of RHMA at different mixing durations was evaluated, and the optimal mixing duration was determined. The results showed that the mixing duration had a significant influence on the dispersion and blending of reclaimed asphalt in RHMA. The longer the mixing duration was, the higher the dispersion and the degree of blending of the reclaimed asphalt in the RHMA were. With the increase in the mixing duration, the properties, chemical composition, and micromorphology of the blended asphalt binder tended to become similar to those of reclaimed asphalt. The performance of RHMA was improved with the increase in mixing duration; however, the energy consumption and CO2 emissions for the RHMA increase significantly with the increase in mixing time. The recommended optimal mixing durations in the mixing plant and in the laboratory were found to be 60 s and 90 s, respectively, considering the environmental impact, the RHMA production efficiency, and the performance of the RHMA.

 Artículos similares

       
 
Loris Simonassi, Gustavo Lopes and Sergio Lavagnoli    
The influence of unsteady wakes incoming from the upstream stages is of high relevance in modern high-speed, low-pressure turbines (LPT) operating at transonic exit Mach numbers and low Reynolds numbers for their potential to trigger transition and influ... ver más

 
Xiaomin Jiang, Ziwan Zheng, Ye Zheng and Zhewei Mao    
Theft is an inevitable problem in the context of urbanization and poses a challenge to people?s lives and social stability. The study of theft and criminal behavior using spatiotemporal, big, demographic, and neighborhood data is important for guiding se... ver más

 
Inamullah Khan, Abdul Wahab Khattak, Alireza Bahrami, Shahab Khattak and Ali Ejaz    
Flexible pavements are mostly affected by meteorological factors in addition to traffic loads, which results in premature pavement failures like rutting and moisture-induced damage. This study focuses on the impacts of adding various contents of nano-sil... ver más
Revista: Buildings

 
Zhaoyi Zhuang, Jin Zhao, Fengfeng Mi, Teng Zhang, Yuguo Hao and Shangyue Li    
Heat pump technology can extract low-level heat energy from urban sewage to heat or cool buildings, which can alleviate the two major problems of energy shortage and environmental pollution to a certain extent. This paper introduces the principle of wast... ver más
Revista: Buildings

 
Serena Falasca, Annalisa Di Bernardino, Virgilio Ciancio, Gabriele Curci and Ferdinando Salata    
The thermo-hygrometric sensation of pedestrians in outdoor environments can be quantified by means of bioclimatic indices. In this work, the Mediterranean Outdoor Thermal Comfort Index (MOCI) is applied in the city of Rome (Italy) for the purpose of inve... ver más
Revista: Urban Science