ARTÍCULO
TITULO

Influence of Structure and Liquid Limit on the Secondary Compressibility of Soft Soils

Nan Jiang    
Changming Wang    
Qian Wu and Shuo Li    

Resumen

The macroscopic mechanical properties of natural sedimentary soft soils, which are usually linked to their microstructure, are different from those of remolded soils. The interaction between soil structure and mechanical behavior is a manifestation of structural mechanics effects. It is essential to understand the effects of secondary compressibility to predict long-term foundation deformations. The effects of soil composition on secondary compression deformation are little studied, and the soil structure is rarely involved in the compression process. The sedimentary environment creates the initial composition and structure of soft soil, and it also basically determines its grain size and mineral composition, while different depths give soft soil different overburden pressures, and the soil composition and depth directly affect its yield stress during compression. So, natural sedimentary soft soils sampled at different depths and from different sedimentary environments (such as marine-neritic facies, sea shore facies and limnetic facies) were selected to study the influence of structure on the secondary compression coefficient Ca during pressure change and the relationship between soil composition and Ca. One-dimensional compression and consolidation creep tests were carried out on undisturbed and remolded samples. The undisturbed samples were obtained by the thin-wall samplers in rotary wash borings, and the quality of the samples met the test standard. Based on the concept of the void index Iv and the intrinsic compression line (ICL) proposed by Burland, the role of structure in the compression process was studied, and the influence of soil composition and structure on secondary compression characteristics was summarized. The Ca/Cc values are 0.031, 0.034, 0.030, and 0.036 for Shanghai, Tianjin, Suzhou, and Ningbo soft soils, respectively, within the range of inorganic clays and silts (0.04 ± 0.01) given by Mesri. According to the compression index Cc obtained by compression test, Ca/Cc can be used to estimate Ca. The yield stress of normal consolidated soil is near pre-consolidation pressure, while that of structural soft soil is greater than its pre-consolidation pressure. Natural sedimentary soft soils show over-consolidation characteristics due to the action of the structure; the soil structure resists the external load and hinders secondary compression. When the soil structure is almost destroyed, the pressure reaches the structure full yield stress P'. The tests of structural soft soils show that Ca changes with pressure before the structure completely yields, first increasing and reaching peak Camax near P'; the value of P' is approximately 1.6?3.0 s?k, where s?k refers to the structure yield stress of soil obtained by the Casagrande method. After the structure disappeared, Ca gradually decreased and then stabilized, which is considered to be independent of the load. The Camax is positively correlated with the liquid limit, indicating that the peak value that can be reached by the Ca is related to the maximum content of bound water in soft soil, thus the soil composition has a significant influence on secondary compressibility, which contributes to the prediction of long-term foundation deformation.

 Artículos similares

       
 
Dmitry Shved, Natalia Supolkina and Anna Yusupova    
The increasing complexity of the space flight program and the increase in the duration of missions require an improvement in psychological monitoring tools for astronauts in orbit. This article summarizes the experience of using quantitative content anal... ver más
Revista: Aerospace

 
Yadong Zhu, Haifeng Jiao, Shihui Wang, Wenbo Zhu, Mengcheng Wang and Songshan Chen    
In order to study the pressure pulsation characteristics and structural dynamic response characteristics of a vertical shaft cross-flow pump, this study used a computational fluid dynamics (CFD) numerical simulation method to analyze the pressure pulsati... ver más
Revista: Water

 
Chen Chen, Hong Zhou, Zhengda Lv and Ziqiu Li    
Plated grillage with combined openings was susceptible to complex failure behaviors as the main load-bearing structure of the superstructure on passenger ships subjected to deck loads. Additionally, the deformation and stresses generated during the weldi... ver más

 
Sta?a Pu?karic, Mateo Sokac, ?ivana Nincevic, Danijela ?antic, Sanda Skejic, Tomislav D?oic, Heliodor Prelesnik and Knut Yngve Børsheim    
In this communication, we present an innovative approach leveraging advanced Machine Learning (ML) and Artificial Intelligence (AI) techniques, specifically the Non-Negative Matrix Factorization (NMF) method, to analyze downward and upward light spectra ... ver más

 
Yi Wang and Chunxin Yang    
A parafoil is a crucial aerodynamic deceleration device used in the field of airdrop. The overall objective of this paper is to study the aerodynamic characteristics of the curving process of the canopy using the lattice Boltzmann method, to verify it wi... ver más
Revista: Aerospace