Resumen
Failure mode and effect analysis (FMEA) is one of the most widely employed pre-evaluation techniques to avoid risks that may occur during product design and manufacturing phases. However, use of the risk priority number (RPN) in traditional FMEA results in difficulties being encountered with regard to quantification of the degree of risk involved. This study proposes the use of a probabilistic time-dependent FMEA (TD-FMEA) approach to overcome limitations encountered during implementation of traditional FMEA approaches. To this end, the proposed method defines the risk priority metric (RPM) as a priority decision value. RPM corresponds to the product of the expected loss and occurrence rate of the failure-cause. By assuming exponential and case functions for each occurrence and detection time instant, the expected loss corresponding to each failure-cause can be evaluated. Utility of the proposed approach has been described in the light of results obtained via its implementation during an automotive-manufacturing case study performed for the purpose of illustration.