Inicio  /  Buildings  /  Vol: 13 Par: 12 (2023)  /  Artículo
ARTÍCULO
TITULO

Load?Displacement Behaviour and a Parametric Study of Hybrid Rubberised Concrete Double-Skin Tubular Columns

Shovona Khusru    
David P. Thambiratnam    
Mohamed Elchalakani and Sabrina Fawzia    

Resumen

Rubberised concrete has emerged as a material of interest to the research community with the mission of creating sustainable structural members and decreasing the burden of waste tyre rubber. The potential benefits of replacing natural aggregates with rubber particles to obtain greater energy absorption and ductility are proven in the literature. To negate the reduction in capacity due to the addition of rubber particles, single- and double-skin confinements were proposed and successfully tested by researchers. Hybrid rubberised double-skin tubular columns (RuDSTCs) were recently trialled and tested by the authors. Each of these hybrid RuDSTCs had a filament-wound carbon fibre-reinforced polymer (CFRP) outer tube and an inner steel tube with rubberised concrete as the sandwich material between the two tubes. To explore the axial behaviour of such a column, this paper develops a finite element modelling strategy and carries out a comprehensive parametric study of the hybrid RuDSTC with 0%, 15%, and 30% combined aggregates replaced with rubber particles. This methodology is validated by experimental results, and a good agreement is found. Hybrid RuDSTC models are developed in four groups with different material and geometric parameters, in addition to those corresponding to the experimentally tested column, to explore the effects of the thickness ratio, hollow ratio, steel tube yield strength, and CFRP tube diameter with a special focus on the transition of the characteristic bilinear stress?strain curve of the hybrid RuDSTCs. The results show the smooth transition of the stress?strain curve with increasing rubber content after the yielding of steel, which indicates better ductility of the rubberised columns. The novel hybrid RuDSTCs can provide a promising sustainable solution with greater capacity compared with their unconfined counterparts. Better strain and enhanced ductility of the hybrid RuDSTCs compared with non-rubberized hybrid DSTCs enable their use in seismic-prone regions and mining infrastructure.

 Artículos similares

       
 
Hadee Mohammed Najm, Amer M. Ibrahim, Mohanad Muayad Sabri, Amer Hassan, Samadhan Morkhade, Nuha S. Mashaan, Moutaz Mustafa A. Eldirderi and Khaled Mohamed Khedher    
In recent years, steel-concrete composite shear walls have been widely used in enormous high-rise buildings. Due to their high strength and ductility, enhanced stiffness, stable cycle characteristics and large energy absorption, such walls can be adopted... ver más
Revista: Buildings

 
Nouha Dkhili, Julien Eynard, Stéphane Thil and Stéphane Grieu    
In a context of accelerating deployment of distributed generation in power distribution grid, this work proposes an answer to an important and urgent need for better management tools in order to ?intelligently? operate these grids and maintain quality of... ver más

 
Annalisa Greco, Alessandro Pluchino, Luca Barbarossa, Giovanni Barreca, Ivo Caliò, Francesco Martinico and Andrea Rapisarda    
In order to estimate the seismic vulnerability of a densely populated urban area, it would in principle be necessary to evaluate the dynamic behaviour of individual and aggregate buildings. These detailed seismic analyses, however, are extremely cost-int... ver más

 
Md Shahnewaz, Shahria Alam and Thomas Tannert    
The research presented herein investigated the in-plane performance of cross-laminated timber (CLT) shear walls for platform-type buildings under lateral loading. Finite element models of CLT connections (i.e., brackets, hold-downs and self-tapping screw... ver más
Revista: Buildings

 
Martina Sciomenta, Chiara Bedon, Massimo Fragiacomo and Angelo Luongo    
Log-house is an ancient construction technology based on the superposition of linear timber logs, connected to the orthogonal walls by a system of carvings, notches and corner joints. Due to the fact that this solution is widely used in constructions loc... ver más
Revista: Buildings