Resumen
The design of organic Rankine cycle (ORC) turbines often requires dealing with transonic flows due to the cycle efficiency requirements and the matching of the temperature profiles with heat sources and sinks, as well as the nature of organic fluids, often featuring high molecular weight. Consequently, the use of convergent?divergent turbine stators has been widely established as a solution in the published literature for use in both axial- and radial-inflow machines. With respect to the latter layout in particular, the available design guidelines are still limited. The present work shows the results of an investigation into a series of ORC radial-inflow convergent?divergent nozzles that differ with respect to the vane count and the designed metal angle of the outlet. These stators were designed by fitting the divergent portion of a sharp-edged minimum-length nozzle, designed by means of the method of characteristics (MoC) adapted to dense gases, into a radial-inflow turbine stator. The geometries were analysed by means of steady-state RANS CFD calculations, and the results were used to assess the influence of the design parameters on the nozzle losses and downstream flow field uniformity, showing that conflicting trends exist between optimum stator efficiency and optimum downstream flow field uniformity.