ARTÍCULO
TITULO

Wave and Hydrodynamic Modeling for Engineering Design of Jetties at Tangier Island in Chesapeake Bay, USA

Lihwa Lin    
Zeki Demirbilek    
Donald Ward and David King    

Resumen

The protection of a boat canal at the western entrance of Tangier Island, Virginia, located in the lower Chesapeake Bay, is investigated using different structural alternatives. The existing entrance channel is oriented 45 deg with respect to the local shoreline, and exposed directly to the lower Bay without any protection. The adjacent shoreline has experienced progressive erosion in recent decades by flooding due to severe storms and waves. To protect the western entrance of the channel and shoreline, five different jetty and spur combinations were proposed to reduce wave energy in the lee of jetties. Environmental forces affecting the proposed jettied inlet system are quantified using the Coastal Modeling System, consisting of a spectral wave model and a depth-averaged circulation model with sediment transport calculations. Numerical simulations were conducted for design wave conditions and a 50-year return period tropical storm at the project site. Model results show a low crested jetty of 170-m length connecting to the north shore at a 45-deg angle, and a short south spur of 25-m long, provide adequate wave-reduction benefits among the five proposed alternatives. The model simulation indicates this alternative has the minimum impact on sedimentation around the structured inlet and boat canal.

 Artículos similares

       
 
Weiqin Liu, Qilu Zou, Yaqiang Zhang, Yong Nie and Xuemin Song    
Large waves cause a great number of collapsed-ship accidents, resulting in the loss of many lives and properties. It has been found that most of these collapses are caused by encountering oblique waves. As a result, the ship structure experiences a compl... ver más

 
Le Duc Quyen, Young-Gyu Park, In-cheol Lee and Jun Myoung Choi    
Microplastics, ubiquitous in our environment, are significantly impacted by the hydrodynamic conditions around them. This study utilizes CFD to explore how various breaker types influence the dispersion and accumulation of microplastics in nearshore area... ver más

 
Zereng Chen, Qinghe Zhang, Guoquan Ran and Yang Nie    
A wetting and drying treatment for a three-dimensional discontinuous Galerkin hydrodynamic model without mode splitting (external and internal modes) was developed. In this approach, computing elements are classified into wet, dry, and semidry elements, ... ver más

 
Won-June Jeong, Seol Nam, Jong-Chun Park and Hyeon Kyu Yoon    
This study aims to investigate the influence of wheel configurations on hydrodynamic resistance of an amphibious vessel through experiments and simulations. To evaluate the resistance performance associated with wheel attachments, three configurations we... ver más

 
Dilshan S. P. Amarasinghe Baragamage and Weiming Wu    
A three-dimensional (3D) fully-coupled fluid-structure model has been developed in this study to calculate the impact force of tsunamis on a flexible structure considering fluid-structure interactions. The propagation of a tsunami is simulated by solving... ver más
Revista: Water