Resumen
A new biosorbent obtained from Calabrese broccoli stalks has been prepared, characterised and used as an effective, low-cost and ecofriendly biomass to remove Pb(II) from aqueous solutions, without any complicated pretreatment. Structural and morphological characterisation were performed by TGA/DGT, FTIR and SEM/EDX; the main components are hemicellulose, starches, pectin, cellulose, lignin and phytochemicals, with important electron donor elements (such as S from glucosinolates of broccoli) involved in Pb(II) sorption. The biosorbent showed values of 0.52 and 0.65 g mL-1 for bulk and apparent densities, 20.6% porosity, a specific surface area of 15.3 m2 g-1, pHpzc 6.25, iodine capacity of 619 mg g-1 and a cation exchange capacity of 30.7 cmol kg-1. Very good sorption (88.3 ± 0.8%) occurred at pH 4.8 with a biomass dose of 10 g L-1 after 8 h. The Freundlich and Dubinin?Radushkevich isotherms and the pseudo-second-order kinetic models explained with good fits the favourable Pb(II) sorption on the heterogeneous surface of broccoli biomass. The maximum adsorption capacity was 586.7 mg g-1. The thermodynamic parameters evaluated showed the endothermic and spontaneous nature of the Pb(II) biosorption. The chemical mechanisms mainly involved complexation, ligand exchange and cation?p interaction, with possible precipitation.