ARTÍCULO
TITULO

Overpressure-generating mechanisms in the Blok F3, North Sea, Netherland

Khusmia Karin    
. Sudarmaji    

Resumen

Block F3 North Sea is a block with pore pressure values that vary over time due to complex geological conditions such as burial and various sedimentation zones. Pore pressure is one of the important aspects that need to be analyzed as a basis for the identification of zones and overpressure mechanisms. Overpressure is a greater pore pressure condition than normal pressure and may cause drilling problems, such as kicks, blowouts, etc. This study calculated pore pressure values using the eaton method approach with well data and seismic data. Both data are integrated for generating pore pressure values in 1D and 3D. 1D Modelling uses Interactive Petrophysics 3.5, while 3D modeling uses Petrel software. In 3D modeling, the variables used are interval velocity and inversion velocity obtained by acoustic impedance inversion. The sub-variables used are the inversion density and the regression density obtained from well density acoustic impedance inversion. The existence of a 1D overpressure zone at a depth of 1,100 ? 1,800 m with an overpressure value of 3,836 ? 18,975 kPa. In addition, the overpressure value based on the 3D model is 8,000 ? 18,000 kPa. The overpressure zone is validated using an acoustic impedance inversion model with a high value of 5,200 ? 5,380 (m/s)*(gr/cc). Overpressure in Block F3 is predicted to occur from disequilibrium compaction..

 Artículos similares

       
 
Ivan di Stefano, Daniele Durante, Paolo Cappuccio and Paolo Racioppa    
The exploration of Uranus, a key archetype for ice giant planets and a gateway to understanding distant exoplanets, is acquiring increasing interest in recent years, especially after the Uranus Orbiter and Probe (UOP) mission has been prioritized in the ... ver más
Revista: Aerospace

 
Muhammad Anwar Ishak, Abdul Halim Abdul Latiff, Eric Tatt Wei Ho, Muhammad Izzuljad Ahmad Fuad, Nian Wei Tan, Muhammad Sajid and Emad Elsebakhi    
The prediction of subsurface properties such as velocity, density, porosity, and water saturation has been the main focus of petroleum geosciences. Advanced methods such as Full Waveform Inversion (FWI), Joint Migration Inversion (JMI) and ML-Rock Physic... ver más
Revista: Applied Sciences

 
Xiaoyu Lu, Ruipeng Qin, Chunliang Dong and Chaotao Fan    
In many underground engineering projects, rocks are often subjected to cyclic loading and unloading, such as repeated excavation of roadway surrounding rock, which will lead to damage to underground rocks, and the energy of rocks also changes. Therefore,... ver más
Revista: Applied Sciences

 
Tianwei Huang, Mengxing He, Kan Hong, Yingtien Lin and Pengcheng Jiao    
Curved channels and aquatic vegetation are commonly present in the riverine environment. In this study, the effects of vegetation density and distribution on the hydrodynamic characteristics of a mixed layer developed over a 180-degree curved channel wer... ver más

 
Xinxin Zhao, Faling Yin, Haiyuan Yao, Yaqiang Qi and Xin Cao    
Mass transfer and phase transition have an important effect on the velocity of bubble migration in deepwater wellbores, and accurate prediction of bubble migration velocity is crucial for calculating the safe shut-in period of deepwater oil and gas wells... ver más