Inicio  /  Aerospace  /  Vol: 8 Par: 2 (2021)  /  Artículo
ARTÍCULO
TITULO

Wind-Tunnel Measurement of Differential Pressure on the Surface of a Dynamically Inflatable Wing Cell

Diego Muniz Benedetti and Carlos Alberto Gurgel Veras    

Resumen

An instrumentation system for in-situ measurement of the inner-outer pressure differential at the upper and lower surfaces of dynamically inflatable wings is designed and tested, revealing important insights into the aerodynamic characteristics of inflatable airfoils. Wind tunnel tests demonstrated full capability of low-pressure differential readings in the range of 1.0?120 Pa, covering speeds from 3 to 10 m/s at angles of attack from -20 to +25°. Readings were stable, presenting coefficients of variation from 2% to 7% over the operational flight envelope. The experimental data confirmed the occurrence of a bottom leading-edge recirculation bubble, linked to the low Reynolds regime and the presence of an air intake. It supported the proposition of a novel approach to aerodynamic characterization based on local pressure differentials, which takes in account the confined airflow structure and provides lift forces estimations compatible with practical observation. The results were also compatible with data previously obtained following different strategies and were shown to be effective for parameterizing the inflation and stall phenomena. Overall, the instrumentation may be applied straightforwardly as a flight-test equipment, and it can be further converted into collapse alert and prevention systems.

 Artículos similares

       
 
Chunhua Wei, Chenglin Zuo, Xianhui Liao, Guoshuai Li, Lingrui Jiao, Di Peng and Lei Liang    
A simultaneous surface pressure and displacement measurement method that integrates pressure-sensitive paint (PSP) and binocular stereophotogrammetry is proposed. The assays were completed on the F4 m rotor test stand at China Aerodynamic Research and De... ver más
Revista: Aerospace

 
Yewei Huang and Wenli Chen    
In this study, we employed a four-hole cobra probe to measure the wake characteristics of a rec-tangular bridge tower model in a wind tunnel. The scale of the model was 1:30, and the Reynolds number varied from 1.38 × 105 to 2.27 × 105 by changing the ya... ver más
Revista: Applied Sciences

 
Yi Su, Jin Di, Shaopeng Li, Bin Jian and Jun Liu    
The traditional method for calculating the buffeting response of long-span bridges follows the strip assumption, and is carried out by identifying aerodynamic parameters through sectional model force or pressure measurement wind tunnel tests. However, th... ver más
Revista: Applied Sciences

 
Tianyi Shi, Gang Hu and Lianghao Zou    
Galloping-based piezoelectric wind energy harvesters (WEHs) are being used to supply renewable electricity for self-powered devices. This paper investigates the performance of a galloping-based piezoelectric WEH, with different arc-plate-shaped bluff bod... ver más
Revista: Applied Sciences

 
Changkun Yu, Zhigang Wu and Chao Yang    
With the increasing bandwidths of servo control systems and decreasing mode frequencies, aeroservoelastic (ASE) stability evaluation has become an essential part of flight vehicle design. However, the theoretical method is limited by the modeling errors ... ver más
Revista: Aerospace