Portada: Infraestructura para la Logística Sustentable 2050
DESTACADO | CPI Propone - Resumen Ejecutivo

Infraestructura para el desarrollo que queremos 2026-2030

Elaborado por el Consejo de Políticas de Infraestructura (CPI), este documento constituye una hoja de ruta estratégica para orientar la inversión y la gestión de infraestructura en Chile. Presenta propuestas organizadas en siete ejes estratégicos, sin centrarse en proyectos específicos, sino en influir en las decisiones de política pública para promover una infraestructura que conecte territorios, genere oportunidades y eleve la calidad de vida de la población.
Redirigiendo al acceso original de articulo en 17 segundos...
ARTÍCULO
TITULO

Numerical Simulation and Optimization of Outdoor Wind Environment in High-Rise Buildings Zone of Xuzhou City

Huanhuan Fang    
Xiang Ji    
Jiuxin Wang    
Jijun Lu    
Mengcheng Yang    
Jiajun Li and Zhongcheng Duan    

Resumen

High-rise developments frequently exert adverse impacts on the outdoor wind environment, leading to a deterioration in the overall quality of urban surroundings and a reduction in the comfort levels of residents. This study systematically investigates typical high-rise settlements in Xuzhou City and proposes optimization strategies to address wind environment issues through an in-depth analysis of building planning parameters. Utilizing Computational Fluid Dynamics (CFD) simulations, the research identifies key wind-related challenges associated with high-rise buildings in representative settlements. The study comprehensively examines the effects of building height, width, orientation, spacing, and layout on the outdoor wind field, progressing from individual building units to clusters. Based on these findings, optimization strategies are formulated and validated through CFD simulations conducted on a representative high-rise settlement in Xuzhou. The results reveal that typical high-rise buildings in Xuzhou exhibit a height of 54 m, a width of 48 m, and an orientation ranging from 15° to 30° southeast. The front-to-rear building spacing is approximately 1.44 times the building height, with an additional 15 m spacing from mountain walls. Optimal wind conditions are achieved with a center-vacant building layout. The optimization of building form, spacing, and orientation substantially improves the outdoor wind environment by alleviating stagnant wind zones and reducing wind pressure differentials between the building fronts and rears, thereby enhancing the comfort of residents. This study provides a valuable reference for the planning and design of high-rise settlements, contributing to an improvement in urban environmental quality and the enhancement of livability.

Artículos similares

Hemos preparados una selección de otros artículos que pudieran ser de tu interés
Pengfei Du, Xi Zhao, Zhidong Zhang, Xiaoyan Sun and Gang Du    
Cold-formed steel (CFS) structures are widely used in construction and infrastructure due to their lightweight and high-strength properties. However, their thin-walled nature makes them geometrically sensitive to compressive loading. The Digital Twin (DT... ver más
Revista: Buildings
Luoan Wu, Yue Gao, Yaohui Du, Junjie Xuan, Jiu Nao, Shibo Li, Jinhao Li, Yanqi Wang, Hao Zhang, Lei Cao, Cheng Meng and Zewei Yang    
The screw-core mixing pile, which enhances traditional smooth-surface rigid piles by introducing a threaded surface, has been rapidly applied in China. Indoor model testing and numerical simulation techniques are used to perform static load tests on sing... ver más
Revista: Buildings
Xianquan Wang, Yong Qiu, Jie Yuan, Dongyan Liu, Peiyu Shi, Chenchen Zhao, Shanyuan Xu and Tengfei Zhao    
Spatial truss structures (STSs), serving as the bottom support structure of a cooling tower, effectively harness the superior load-bearing capacity offered by lattice-type truss structures. STSs are composed of main bars, diagonal bars, and horizontal ba... ver más
Revista: Buildings
Peiyu Wang, Huting Wang, Ruoyu Zhang, Rong Hu, Beibei Hao and Jie Huang    
Cotton processing is the process of converting harvested seed cotton into lint by cleaning, ginning, and cleaning the lint. The real-time acquisition of lint parameters during processing is critical in improving cotton processing quality and efficiency. ... ver más
Revista: Agriculture
Yingke Liao, Guiping Zhu, Guang Wang, Jie Wang and Yanchao Ding    
Magnetohydrodynamic (MHD) is one of the most promising novel propulsion technologies with the advantages of no pollution, high specific impulse, and high acceleration efficiency. As the carrier of this technology, the MHD accelerator has enormous potenti... ver más
Revista: Aerospace