Resumen
Additive manufacturing allows the fabrication of relatively complex cooling structures, such as triply periodic minimal surface (TPMS), which offers high heat transfer per unit volume. This study shows the turbulent flow heat transfer and thermal stress of the Diamond-TPMS topology in the gas turbine blade trailing edge channel. The thermal-fluid-solid analysis of the Diamond-TPMS structure, made of directionally solidified GTD111, at the nearly realistic gas turbine condition is executed, and the results are compared with the conventional pin fin array at the Reynolds number of 30,000. Compared to the baseline pin fin structure, the Diamond-TPMS model distributes flow characteristics more uniformly throughout the channel. The overall heat transfer enhancement, friction factor ratio, and thermal performance are increased by 145.3%, 200.9%, and 32.5%, respectively. The temperature, displacement, and thermal stress in the Diamond-TPMS model are also distributed more evenly. The average temperature on the external surface in the Diamond-TPMS model is lower than the baseline pin fin array by 19.9%. The Diamond-TPMS network in the wedge-shaped cooling channel helps reduce the volume displacement due to the material thermal expansion by 29.3%. Moreover, the volume-averaged von Mises stress in the Diamond-TPMS structure is decreased by 28.8%.