Inicio  /  Coatings  /  Vol: 7 Núm: 8 Par: August (2017)  /  Artículo
ARTÍCULO
TITULO

Antireflection Coatings for Strongly Curved Glass Lenses by Atomic Layer Deposition

Kristin Pfeiffer    
Ulrike Schulz    
Andreas Tünnermann and Adriana Szeghalmi    

Resumen

Antireflection (AR) coatings are indispensable in numerous optical applications and are increasingly demanded on highly curved optical components. In this work, optical thin films of SiO2, Al2O3, TiO2 and Ta2O5 were prepared by atomic layer deposition (ALD), which is based on self-limiting surface reactions leading to a uniform film thickness on arbitrarily shaped surfaces. Al2O3/TiO2/SiO2 and Al2O3/Ta2O5/SiO2 AR coatings were successfully applied in the 400?750 nm and 400?700 nm spectral range, respectively. Less than 0.6% reflectance with an average of 0.3% has been measured on a fused silica hemispherical (half-ball) lens with 4 mm diameter along the entire lens surface at 0° angle of incidence. The reflectance on a large B270 aspherical lens with height of 25 mm and diameter of 50 mm decreased to less than 1% with an average reflectance < 0.3%. The results demonstrate that ALD is a promising technology for deposition of uniform optical layers on strongly curved lenses without complex in situ thickness monitoring.

 Artículos similares

       
 
Muhammad Bilal Hanif, Marcel Sihor, Viktoriia Liapun, Hryhorii Makarov, Olivier Monfort and Martin Motola    
Herein, the preparation of nanotubular and porous TiO2 structures (TNS) is presented for photocatalytic applications. Different TNS were prepared in three different types of glycerol- and ethylene glycol-based electrolytes on a large area (approx. 20 cm2... ver más
Revista: Coatings

 
Gloria Pérez, Fernando Martín-Consuegra, Fernando de Frutos, Arturo Martínez, Ignacio Oteiza, Borja Frutos and Carmen Alonso    
The optical response of opaque materials in an urban envelope plays an important role in a city?s energy exchange with the environment as it defines the absorption of radiation and emission of heat. In the present work, the most common surfaces of the fi... ver más
Revista: Infrastructures

 
Ibrahim Al-Helal, Pietro Picuno, Abdullah A. Alsadon, Abdullah Ibrahim, Mohamed Shady and Ahmed M. Abdel-Ghany    
In arid climates, the optical properties of plastic-covered greenhouses deteriorate very quickly. To examine the effect of greenhouse shape and orientation on the degradation rate of cover optical properties, four greenhouse prototypes were constructed i... ver más
Revista: Applied Sciences

 
Hyunsoo Lim, Seong Hyeon Cho, Jiyeon Moon, Da Yeong Jun and Sung Hyun Kim    
In the photovoltaic (PV) module manufacturing process, cell-to-module (CTM) loss is inevitably caused by the optical loss, and it generally leads to the output power loss of about 2~3%. It is known that the CTM loss rate can be reduced by increasing the ... ver más
Revista: Applied Sciences

 
Konstantin Lovchinov, Rositsa Gergova and Gergana Alexieva    
This article focuses on the impact of the deposition temperature (in the range from 60 to 80 °C) in ZrO2 films obtained by the electrochemical deposition process on SnO2-covered glass substrates. The solution in which the deposition takes place is aqueou... ver más
Revista: Coatings