ARTÍCULO
TITULO

Improving the resistance of concrete for sleepers to the formation of delayed and secondary ettringite, the alkali-silica reaction, and electric corrosion

Vyacheslav Troyan    
Nadiia Sova    

Resumen

The paper reports results of examining the influence of modifier admixtures on the corrosion resistance of concrete for reinforced concrete sleepers based on the criteria of electric resistance, resistance to alkaline corrosion and corrosion due to the crystallization of delayed and secondary ettringite. This study was conducted within the framework of resolving the issue on premature destruction of reinforced-concrete sleepers caused by the progressing crack formation at the stage of heat treatment and subsequent operation. It has been established that the introduction of pozzolanic admixtures containing active Al2O3 in their formulation to the composition of concrete for sleepers makes it possible to minimize the risk of corrosion predetermined by the reaction between aggregates? silica and alkali and corrosion as a result of crystallization of delayed and secondary ettringite. The high efficiency of pozzolanic admixtures containing active Al2O3 regarding the specified types of corrosion is due to binding alkali into the insoluble alkaline hydroalumosilicates, contributing to the compaction of the system with a decrease in the content of Na+/K+ ions in the solution. A decrease in the content of alkali in the porous solution predetermines blocking the «alkali-silica reaction» and increasing the temperature of ettringite stability to higher values. This reduces the potential number of secondary ettringite forming cycles and the probability of delayed ettringite formation. The alternative mechanism of action of active Al2O3 on pozzolan implies binding the SO42? and Ca2+ ions from a porous solution into low-sulfate forms of calcium hydro-sulfoaluminates, which excludes the crystallization of delayed and secondary ettringite.Reducing the consumption of cement and water through the use of admixtures-plasticizers makes it possible to increase the electrical resistivity of the modified concrete for sleepers above the level of a control composition without admixtures. The obtained results provide an opportunity to ensure the design durability of concrete in reinforced-concrete sleepers through their comprehensive modification by plasticizers and active mineral admixtures that contain active Al2O3

 Artículos similares

       
 
Yafeng Zhang, Juncheng Die, Fei Li, Hai Li, Jinchun Tu, Kexi Zhang and Xiaolong Yu    
The search for lightweight and low-cost anticorrosion coatings is particularly important in coastal environments with high salt and humidity. Graphene-based anticorrosion coatings are currently unable to provide long-lasting corrosion protection for meta... ver más
Revista: Coatings

 
Yixun Yu, Mengmeng Liang and Yunfeng Pan    
Epoxy coatings provide an economical and practical solution for combating steel corrosion. However, epoxy coatings have poor conductivity, resulting in the accumulation of electrostatic charges. The surface conductivity and anticorrosion properties of ep... ver más
Revista: Coatings

 
Yinglong Kang, Kemin Zhang and Xi Lin    
Whether it is fossil energy or renewable energy, the storage, efficient use, and multi-application of energy largely depend on the research and preparation of high-performance materials. The research and development of energy storage materials with a hig... ver más
Revista: Coatings

 
Guanglu Zhang, Jindong Huang, Luoshu Wang, Zhenbo Geng, Dequan Zhang and Juncheng Liu    
Space solar cell glass covers require high radiation resistance and wide-spectrum high light transmittance. The existing research on the preparation of thin films or special optical structures on the surface of solar cells rarely involves systematic rese... ver más
Revista: Coatings

 
Jiwei Luo, Xiaoqiang Liu, Xianpeng Liu, Dianjun Zuo, Xiaoyu An and Liqiang Yu    
Anchorage failure of a suction anchor is more likely to occur in low-strength muddy clay. This paper focuses on the failure behaviors of suction anchors and muddy clay stress responses. The centrifugal model test was used to study the loading processes o... ver más