Acceso al sitio web del Consejo de Políticas de Infraestructura

   
ARTÍCULO
TITULO

High-temperature Corrosion of T22 Steel in N2/H2S-mixed Gas

MinJung Kim    

Resumen

ASTM T22 steel (Fe-2.25Cr-1Mo in wt.%) was corroded at 600 and 700 oC for 5-70 h under an atmospheric pressure that consisted of N2-(0.5. 2.5)%H2S-mixed gas. T22 steel corroded rapidly, forming outer FeS scales and inner (FeS, FeCr2O4)-mixed scale. The formation of the outer FeS scale facilitated the oxidation of Cr to FeCr2O4 in the inner scales. Since the nonprotective FeS scale was present over the whole scale, T22 steel displayed poor corrosion resistance.

Palabras claves

PÁGINAS
pp. 126 - 129

 Artículos similares

       
 
Yan Li, Xi Luo, Ruihao Liu, Ze Yun and Jixiang Zhang    
The paper designed an optimized waveguide structure for ultrasonic testing even at a high temperature 500 deg C. With the waveguide structure, an ultrasonic-guided wave testing device was developed. Measurement error increases with temperature if the wav... ver más
Revista: Applied Sciences

 
Wei Chen, Dalu Zhang, Enlei Wang, Feng Yan, Lin Xiang and Zhiwen Xie    
Detailed tests and characterizations were used to investigate the corrosion degradation behaviors of Ti6Al4V alloys in simulated marine environments. These alloys suffered from very slight pitting and a miniscule weight loss of 0.018 mg/cm2 during the 50... ver más
Revista: Coatings

 
Patricia Jovicevic-Klug, Matic Jovicevic-Klug and Bojan Podgornik    
The role of nitrogen, introduced by deep cryogenic treatment (DCT), has been investigated and unraveled in relation to induced surface chemistry changes and improved corrosion resistance of high-alloyed ferrous alloy AISI M35. The assumptions and observa... ver más
Revista: Coatings

 
Songyan Li, Xiaoxia Tian, Jiafu Wang and Shaobo Qu    
Improving the microwave absorption performance of Co-MOF-derived Co@N-C composite by constructing the morphology and spatial structure is a known challenge. In this work, under the action of the binder polyvinylpyrrolidone, 3D-graphene particles can be w... ver más
Revista: Applied Sciences

 
Gifty Oppong Boakye, Laura E. Geambazu, Arna M. Ormsdottir, Baldur G. Gunnarsson, Ioana Csaki, Francesco Fanicchia, Danyil Kovalov and Sigrun N. Karlsdottir    
Materials can be subjected to severe wear and corrosion due to high temperature, high pressure and mechanical loads when used in components for the production of geothermal power. In an effort to increase the lifetime of these components and thus decreas... ver más
Revista: Applied Sciences