Resumen
Although improving the recovery of water-invaded gas reservoirs has been extensively studied in the natural gas industry, the nature of the efficiency of water-invaded gas recovery remains uncertain. Low-field nuclear magnetic resonance (NMR) can be used to clearly identify changes in water saturation in the core during high-pressure water-invasion gas. Here, we provide four types of water-invasion gas experiments (spontaneous imbibition, atmospheric pressure, high-pressure approximate equilibrium, and depletion development water-invasion gas) to reveal the impact of the water-invasion gas efficiency on the recovery of water-invasion gas reservoirs. NMR suggested that imbibition mainly occurs in medium to large pores and that residual gas remains mainly in large pores. The amount of gas driven out from the large pores by imbibition was much greater than that driven out from the small pores. Our findings indicate that the initial gas saturation, contact surface, and permeability are the main factors controlling the residual gas saturation, suggesting that a reasonable initial water saturation should be established before the water-invasion gas experiments. Additionally, the water-invasion gas efficiency at high pressures can be more reliably obtained than that at normal pressures. After the high-pressure approximate equilibrium water invasion for gas displacement, a large amount of residual gas remains in the relatively larger pores of the core, with a residual gas saturation of 42%. In contrast to conventional experiments, the residual gas saturation and water displacement efficiency of the high-pressure approximate equilibrium water invasion for gas displacement did not exhibit a favorable linear relationship with the permeability. The residual gas saturation ranged from 34 to 43% (avg. 38%), while the water displacement efficiency ranged from 32 to 45% (avg. 40%) in the high-pressure approximate equilibrium water invasion for gas displacement. The residual gas saturation in the depletion development water-invasion gas experiment was 26?40% (average: 33%), with an efficiency ranging from 45 to 50% (average: 48%), indicating that the depletion development experiment is closer to the actual development process of gas reservoirs. Our findings provide novel insights into water-invasion gas efficiency, providing robust estimates of the recovery of water-invasion gas reservoirs.