|
|
|
|
|
Tim Heitkamp, Simon Girnth, Sebastian Kuschmitz, Günter Klawitter, Nils Waldt and Thomas Vietor
An existing challenge in the use of continuous fiber reinforcements in additively manufactured parts is the limited availability of suitable fiber materials. This leads to a reduced adaptability of the mechanical properties to the load case. The increase...
ver más
|
|
|
|
|
|
|
|
|
|
|
Peng Wang and Bin Zou
Due to the addition of short/continuous fibers with better mechanical properties, FDM 3D-printed short- and continuous-fiber-reinforced PEEK composites possess better performance than printed PEEK. However, the interlayer bonding performance becomes poor...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yogesh Gandhi and Giangiacomo Minak
Topology Optimization (TO) recently gained importance due to the development of Additive Manufacturing (AM) processes that produce components with good mechanical properties. Among all additive manufacturing technologies, continuous fiber fused filament ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Sean Bowman, Xiaoyu Hu, Qiuran Jiang, Yiping Qiu, Wanshuang Liu and Yi Wei
Graphene oxide (GO) modified with ferrites (GO@Fe3O4) were studied to determine their effect on the interfacial properties of continuous carbon-fiber-reinforced thermoplastic composites. The GO@Fe3O4 were introduced by mixing them directly in an acrylic-...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yiliang Sun, Jingwen Li and Hongfu Li
Thermoplastic resin matrix has a high melt viscosity, which is difficult to impregnate with fibers. The addition of flame retardant will further increase the viscosity of the melt and increase the difficulty of impregnation. It is possible to reduce the ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Kunkun Cui, Yingyi Zhang, Tao Fu, Jie Wang and Xu Zhang
Mullite has high creep resistance, low thermal expansion coefficient and thermal conductivity, excellent corrosion resistance and thermal shock resistance, and plays an important role in traditional ceramics and advanced ceramic materials. However, the p...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ying Ma, Denzel Bridges, Yongchao Yu, Jitai Han, Hong Li and Anming Hu
This study investigated the characteristics and strength of the dissimilar joints between carbon fiber reinforced plastic (CFRP) epoxy composites and aluminum alloys using two different heating methods, Ni/Al reactive multilayer films (RMF) and a low pow...
ver más
|
|
|
|
|
|
|
|
|
|
|
Mathias Flansbjer, Natalie Williams Portal and Daniel Vennetti
As a part of the SESBE (Smart Elements for Sustainable Building Envelopes) project, non-load bearing sandwich elements were developed with Textile Reinforced Reactive Powder Concrete (TRRPC) for outer and inner facings, Foam Concrete (FC) for the insulat...
ver más
|
|
|
|
|
|
|
|
|
|
|
Przemyslaw Lopato
Polymer matrix composites (PMC) play important roles in modern industry. Increasing the number of such structures in aerospace, construction, and automotive applications enforces continuous monitoring of their condition. Nondestructive inspection of laye...
ver más
|
|
|
|
|
|