|
|
|
|
|
Mahmoud T. Nawar, Ahmed S. Eisa, Mohamed T. Elshazli, Yasser E. Ibrahim and Ayman El-Zohairy
|
|
|
|
|
|
|
|
|
|
|
Seyed Fathollah Sajedi, Iman Saffarian, Masoud Pourbaba and Jung Heum Yeon
This paper presents experimental and theoretical assessments of the structural behavior of circular steel fiber-reinforced concrete (SFRC) columns reinforced with glass fiber-reinforced polymer (GFRP) bars subjected to a concentric axial compressive load...
ver más
|
|
|
|
|
|
|
|
|
|
|
Andrea Armonico, Laurent Michel, Mohamed Saidi and Emmanuel Ferrier
This paper examines the cracking behaviour of reinforced concrete beams strengthened by externally bonded fiber-reinforced polymer. The crack opening of RC structures is a key parameter for the durability of concrete structures. It is of vital importance...
ver más
|
|
|
|
|
|
|
|
|
|
|
Fengge Li, Chen Chen and Zehui Xiang
To investigate the effects of concrete canvas (CC) and carbon fiber reinforced plastic (CFRP) reinforcement on the mechanical properties of corroded reinforced concrete columns (compressive strength, flexure strength, strength of extension, and so on), 4...
ver más
|
|
|
|
|
|
|
|
|
|
|
Amirhassan Alizadeh, Taleb Moradi Shaghaghi, Masoud Pourbaba, Seyed Saeed Mirrezaei and Yousef Zandi
Shear failure is an unfavorable phenomenon as it is a brittle type of failure; however, adding rebars and fibers to a concrete beam can minimize its detrimental effects. The objective of this study was to experimentally investigate the shear behavior of ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Nabeel H. Al-Salim, Muna H. Jaber, Rafea F. Hassan, Nisreen S. Mohammed and Husam H. Hussein
Fiber-reinforced concrete is widely acknowledged for its ability to resist cracking effectively and limit its propagation. By preventing cracks from spreading, the addition of fiber composites to concrete can enhance its extensibility and tensile strengt...
ver más
|
|
|
|
|
|
|
|
|
|
|
Martin Vavrus and Jakub Kralovanec
In the case of post-tensioned or geotechnical structures, the anchorage zone is considered a critical part of the design and construction process. Generally, the failure of the anchorage zone is one of the most common problems. High-bearing stresses crea...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ming-Gin Lee, Yung-Chih Wang, Wei-Chien Wang, Hung-Jen Chien and Li-Chi Cheng
Pervious concrete (PC) has gained popularity as an environmentally friendly solution for mitigating the urban heat island effect and promoting sustainable construction. However, its lower compressive strength, attributed to its higher porosity required f...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hongmei Zhang, Zizhao Tang, Yuanfeng Duan and Zhiyuan Chen
Shear walls are important vertical and lateral bearing element in structures. While shear walls with openings are fragile due to stress concentration and the quasi-brittle behavior of concrete in tension. Therefore, additional strengthening rebars are re...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jie Xiao, Yikang Murong, Xiyuan Chen, Lingfei Liu, Keyi Zhai, Haibo Jiang, Linhai Huang and Guodong Wang
In recent years, replacing steel bars with basalt fiber-reinforced polymer (BFRP) bars and replacing ordinary concrete with reactive powder concrete (RPC) are considered effective solutions to the corrosion problem of steel bars in ordinary reinforced co...
ver más
|
|
|
|
|
|