|
|
|
|
|
Yingwei Liang, Assaad Taoum, Nathan Kotlarewski, Andrew Chan and Damien Holloway
The mechanical properties of fibre-managed Eucalyptus nitens (E. nitens) cross-laminated timber (CLT) have previously been extensively studied, proving the material to be structurally safe and reliable. However, the vibration performance of CLT manufactu...
ver más
|
|
|
|
|
|
|
|
|
|
|
Stefano Gaggero and Marco Ferrando
Tip loading is a common strategy to increase the propulsive efficiency of propellers. Solutions such as contracted and tip-loaded (CLT) and ?New generation? CLT propellers exploit the presence of an endplate (?true? or as the result of a dedicated modifi...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yingwei Liang, Assaad Taoum, Nathan Kotlarewski, Andrew Chan and Damien Holloway
In this study, the preliminary serviceability performance of cross-laminated timber (CLT) panels constructed from fibre-managed Eucalyptus nitens (E. nitens) was investigated via bending and vibration tests. Linear four-point bending tests were performed...
ver más
|
|
|
|
|
|
|
|
|
|
|
Mateo Gutierrez, Azin Ettelaei, Nathan Kotlarewski and Michael Lee
Significant volumes of plantation hardwood are available in Australia to produce value-added engineered wood products such as cross-laminated timber (CLT). To validate the possibility of utilising this available resource, the bending structural propertie...
ver más
|
|
|
|
|
|
|
|
|
|
|
Guofang Wu, Liangliang Huo, Yinlan Shen and Haiqing Ren
The calculation method for buckling capacity of cross-laminated timber (CLT) under axial load with one-way members has been investigated and incorporated into design codes worldwide. However, the load may only be applied to a part of the CLT members. In ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zabih Mehdipour, Elisa Poletti, Jorge M. Branco and Paulo B. Lourenço
CLT panels have been investigated for reinforcement of existing masonry-infilled RC framed buildings through the increase of the overall lateral stiffness of the structure, thus reducing the story drift demand. The contribution of CLT panels depends on t...
ver más
|
|
|
|
|
|
|
|
|
|
|
Eva Binder, Wit Derkowski and Thomas K. Bader
Cross-laminated timber (CLT) slabs in residential buildings need additional weight, e.g., in the form of screeds or gravel layers, to fulfill the criterion for the highest impact-sound class. The additional mass is, however, not exploited for the load be...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ariya Eini, Lina Zhou and Chun Ni
Light-frame wood structures are the most common type of construction for residential and low-rise buildings in North America. The 2015 edition of the National Building Code of Canada has increased the height limit for light-frame wood construction from 4...
ver más
|
|
|
|
|
|
|
|
|
|
|
Maral Jafari, Yuxin Pan, Md Shahnewaz and Thomas Tannert
The effects of long duration ground motions on the seismic performance of a newly constructed two-storey balloon-type cross-laminated timber (CLT) building located in Vancouver, Canada, was studied. A three-dimensional numerical model of the building was...
ver más
|
|
|
|
|
|
|
|
|
|
|
Charlotte Svensson Tengberg and Carl-Eric Hagentoft
Design-build contractors are challenged with the task of minimizing failure risks when introducing new technical solutions or adapting technical solutions to new conditions, e.g., climate change. They seem to have a disproportional trust in suppliers and...
ver más
|
|
|
|
|
|