|
|
|
|
|
Katharina Brinkmann, Thomas Hoffmann, Lars Panning-von Scheidt and Heinrich Stüer
In this work, the vibration response of an academic free-standing turbine blisk is analyzed in regard to transient resonance passages. Measurement data are recorded using strain gauges and tip timing to evaluate the blades first bending mode both linearl...
ver más
|
|
|
|
|
|
|
|
|
|
|
Andrea Ballo, Salvatore Pennisi, Giuseppe Scotti and Chiara Venezia
A current-controlled CMOS ring oscillator topology, which exploits the bulk voltages of the inverter stages as control terminals to tune the oscillation frequency, is proposed and analyzed. The solution can be adopted in sub-1 V applications, as it explo...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yunchae Jeon, Donghyun Lee and Hocheon Yoo
Thin-film transistors using metal oxides have been investigated extensively because of their high transparency, large area, and mass production of metal oxide semiconductors. Compatibility with conventional semiconductor processes, such as photolithograp...
ver más
|
|
|
|
|
|
|
|
|
|
|
Cristina Missel Adornes, Deni Germano Alves Neto, Márcio Cherem Schneider and Carlos Galup-Montoro
This work proposes a truly compact MOSFET model that contains only four parameters to assist an integrated circuits (IC) designer in a design by hand. The four-parameter model (4PM) is based on the advanced compact MOSFET (ACM) model and was implemented ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ki-Cheol Yoon, Kwang-Gi Kim, Jun-Won Chung and Byeong-Soo Kim
Sensors in the medical field to detect specific tissues, such as radars, must provide accurate signals from frequency generators. In order to supply an accurate frequency signal, the oscillator must have a low phase noise. Therefore, the resonator used i...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jinho Lee and Ju Han Lee
This study reports a Q-switching-based, 2058-nm holmium (Ho) fiber laser incorporating a saturable absorber (SA) based on graphene oxide (GO). The SA was prepared with a side-polished fiber, while GO particles were deposited onto the fiber-polished surfa...
ver más
|
|
|
|
|
|
|
|
|
|
|
Fadi R. Shahroury
This paper describes the design methodology and calibration technique for a low-power digital pulse width modulation demodulator to enhance its robustness against the process, voltage, and temperature variations in different process corners, in addition ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Zushuai Xie, Zhiqiang Wu and Jianhui Wu
This paper proposes an ultra-low voltage delay element for battery-assistance DC energy harvesting systems. By inserting a low voltage level shifter (VLS), a wider voltage range is obtained to bias the body of the delay element. Thus, both the voltage tr...
ver más
|
|
|
|
|
|
|
|
|
|
|
Wei Yan and John Chandy
-
|
|
|
|
|
|
|
|
|
|
|
Fathi Amsaad, Mohammed Niamat, Amer Dawoud and Selcuk Kose
Silicon Physical Unclonable Functions (sPUFs) are one of the security primitives and state-of-the-art topics in hardware-oriented security and trust research. This paper presents an efficient and dynamic ring oscillator PUFs (d-ROPUFs) technique to impro...
ver más
|
|
|
|
|
|