ARTÍCULO
TITULO

Accuracy Evaluation of Ionospheric Delay from Multi-Scale Reference Networks and Its Augmentation to PPP during Low Solar Activity

Lewen Zhao    
Jan Dou?a and Pavel Václavovic    

Resumen

The Precise Point Positioning (PPP) with fast integer ambiguity resolution (PPP-RTK) is feasible only if the solution is augmented with precise ionospheric parameters. The vertical ionospheric delays together with the receiver hardware biases, are estimated simultaneously based on the uncombined PPP model. The performance of the ionospheric delays was evaluated and applied in the PPP-RTK demonstration during the low solar activity period. The processing was supported by precise products provided by Deutsches GeoForschungsZentrum Potsdam (GFZ) and also by real-time products provided by the National Centre for Space Studies (CNES). Since GFZ provides only precise orbits and clocks, other products needed for ambiguity resolution, such as phase biases, were estimated at the Geodetic Observatory Pecny (GOP). When ambiguity parameters were resolved as integer values in the GPS-only solution, the initial convergence period was reduced from 30 and 20 min to 24 and 13 min when using CNES and GFZ/GOP products, respectively. The accuracy of ionospheric delays derived from the ambiguity fixed PPP, and the CODE global ionosphere map were then assessed. Comparison of ambiguity fixed ionospheric delay obtained at two collocated stations indicated the accuracy of 0.15 TECU for different scenarios with more than 60% improvement compared to the ambiguity float PPP. However, a daily periodic variation can be observed from the multi-day short-baseline ionospheric residuals. The accuracy of the interpolated ionospheric delay from global maps revealed a dependency on the location of the stations, ranging from 1 to 3 TECU. Precise ionospheric delays derived from the EUREF permanent network with an inter-station distance larger than 73 km were selected for ionospheric modeling at the user location. Results indicated that the PPP ambiguity resolution could be achieved within three minutes. After enlarging the inter-station distance to 209 km, ambiguity resolution could also be achieved within several minutes.

 Artículos similares

       
 
Alexandra P. Schneider, Benoit Paoletti, Xavier Ottavy and Christoph Brandstetter    
Experimental monitoring of blade vibration in turbomachinery is typically based on blade-mounted strain gauges. Their signals are used to derive vibration amplitudes which are compared to modal scope limits, including a safety factor. According to indust... ver más

 
Nicola Casari, Ettore Fadiga, Stefano Oliani, Mattia Piovan, Michele Pinelli and Alessio Suman    
Automotive fans, small wind turbines, and manned and unmanned aerial vehicles (MAVs/UAVs) are just a few examples in which noise generated by the flow?s interaction with aerodynamic surfaces is a major concern. The current work shows the potential of a n... ver más

 
Kostiantyn Medvediev, Anna Kharchenko, Anzhelika Stakhova, Yurii Yevseichyk, Vitalii Tsybulskyi and Adrián Bekö    
The proposed methodology aims to determine and forecast the technical condition of bridge elements, which could serve as an advanced engineering tool for assessing reliability and durability. It is developed based on fundamental studies that synthesize t... ver más
Revista: Infrastructures

 
Jianlong Ye, Hongchuan Yu, Gaoyang Liu, Jiong Zhou and Jiangpeng Shu    
Component identification and depth estimation are important for detecting the integrity of post-disaster structures. However, traditional manual methods might be time-consuming, labor-intensive, and influenced by subjective judgments of inspectors. Deep-... ver más
Revista: Buildings

 
Gang Chen, Weixiang Shi, Lei Yu, Jizhuo Huang, Jiangang Wei and Jun Wang    
In recent years, wireless sensors have progressively supplanted conventional limited sensors owing to their attributes of small size, low cost, and high accuracy. Consequently, there has been a growing interest in leveraging wireless sensor networks for ... ver más
Revista: Buildings