ARTÍCULO
TITULO

Effect of drying under service environment on the mechanical properties of structural lightweight concretes.

Carlos Videla    
Patricio Tapia    

Resumen

In this paper the effect of the ambient relative humidity at service on the compressive and splitting strengths and in the modulus of elasticity of structural lightweight concretes is evaluated. Also, relationships are proposed allowing estimating these properties as a function of the ambient relative humidity and drying time. The concretes were made with two types of coarse lightweight aggregates, pumice and fly ash pellets, and with normal density fine aggregate. The concretes were subjected to two different environmental service conditions: 90% relative humidity and curing at 90% relative humidity during the first seven days and then to 50% relative humidity until the age of testing. The samples were tested at 7, 28, 60 and 90 days of age. An important deterioration of the measured properties due to the effect of the drying conditions was observed; at 83 days of drying, the compressive and splitting strength losses were on average of 20% and 15%, respectively, and of the modulus of elasticity of 40% with respect to concretes at 90% relative humidity. It was concluded that there are two main variables that can explain the loss of strength of lightweight concrete due to the effect of a dry environment. The first of them is the water-cement ratio which controls, among others, the permeability of the mortar or resistant phase. The second one is the relative content of lightweight aggregate in the concreteRev. ing. constr. [online]. 2007, vol.22, n.2, pp. 123-137. ISSN 0718-5073.  http://dx.doi.org/10.4067/S0718-50732007000200006.

 Artículos similares

       
 
Thais Theomaris Grabowski, Juliana Martins Teixeira de Abreu Pietrobelli and Ramiro José Espinheira Martins    
This study aimed to investigate the technical feasibility of replacing cement in mortar production with sludge generated in wastewater treatment plants (WWTPs), prepared using different treatments. The sludge used in the experiments was processed using f... ver más

 
Thamer Alomayri, Babar Ali, Syed Safdar Raza, Hawreen Ahmed and Moustafa Hamad    
Seawater mixed (SW) concrete lessens the freshwater (FW) demand and eases the stress on the already depleting FW resources. The use of SW concrete is a sustainable solution that mitigates the environmental impact of concrete production, especially in coa... ver más

 
Aghiad Alhafez, Shingo Miyazawa, Nobukazu Nito, Ryuichiroh Kuga and Etsuo Sakai    
Cement with fly ash has rarely been used in Japan, mainly because its strength development is slower than ordinary Portland cement. In this research, the effect of the new type of fly ash (which was modified by the electrostatic belt separation method) w... ver más
Revista: Infrastructures

 
Eliza Wolska and Géza Regdon, Jr.    
In the presented study, an attempt was made to investigate the most important attributes of solid lipid microparticles (SLM) using thermal analysis (DSC/TG) in order to determine the importance of this technique in the research and development of lipid m... ver más
Revista: Applied Sciences

 
Alessio Cappelli, Mauro Zaninelli, Sirio Cividino, Mattia Fiscella, Enrico Cini, Alessandro Parenti and Piernicola Masella    
Chickpeas are one of the most widely consumed legumes in the world. Nevertheless, the literature is lacking studies on the effect of drying and milling processes on chickpea flour characteristics, thus motivating this work. The first aim of this work is ... ver más
Revista: Applied Sciences