Resumen
The submerged inlet exhibits good stealth characteristics and lower drag, but it has a low total pressure recovery coefficient and high distortion rate, which limits its widespread application. This paper proposes a vortex diverter aimed at enhancing the performance of the submerged inlet and investigates the aerodynamic coupling mechanism between the vortex diverter and the submerged inlet in detail. Firstly, based on the flow field characteristics of the submerged inlet, the design principles of the vortex diverter are proposed. Then, the impact of the vortex diverter on the flow field of the submerged inlet is analyzed using the numerical method. Finally, the matching design between the vortex diverter and the submerged inlet is explored. The results show that the vortex diverter improves the average total pressure of the airflow inside the inlet by exhausting the low-energy flow from the larger radius side of the inlet, thereby suppressing flow separation and enhancing flow field uniformity. The vortex diverter improves the intake performance of the submerged inlet under different incoming flow Mach numbers, inlet exit Mach numbers, angles of attack, and small sideslip angles. The maximum increase in the total pressure recovery coefficient is 3.1099%, and the maximum reduction in the circumferential total pressure distortion is 49.5207%. Among the design parameters, the horizontal distance between the leading edge of the vortex diverter and the inlet lip has the greatest influence on the intake performance, and the best control effect is achieved when the vortex diverter is installed at the throat position. Furthermore, after installing the vortex diverter, reducing the side-edge angle of the entrance appropriately can effectively reduce the intensity of the secondary flow, thereby improving the total pressure recovery at the exit and reducing the distortion rate.