Redirigiendo al acceso original de articulo en 23 segundos...
Inicio  /  Innovaciencia  /  Vol: 7 Núm: 2 Par: 0 (2019)  /  Artículo
ARTÍCULO
TITULO

Numerical analysis of varies geometries on dynamic analysis on the gravity platform

Tina Rezaei    
Atefeh Mosahebi Mohammadi    
Elham Mina    
Mohammad Reza    

Resumen

On Gravity platform Dynamic Response is a support structure held in place by gravity. Given that the gravity platforms are supported by the sea bed but not attached to the ground, the motion of them is known as a rocking fluctuation. During the fluctuations, the platform maybe overturned if the angle is large. In this study, using Ansys Aqwa hydrodynamic software and analytical methods with regard to the performance, the dynamic interaction of platform?s geometry on hydrodynamic forces have been simulated. The objective of this study was to analyze the hydrodynamic parameters of the sea and rocking fluctuations of gravity platforms under the impact of regular wave?s moment considering the soil mechanics and hydrodynamic features of the structure. In order to achieve the objective the hydrodynamic forces using numerical simulations and analytical methods for one column and three hollow columns platforms were analyzed. Finally, responses of the platform to irregular waves were studied using numerical simulation. The results showed that with the increasing of the depth, the impact of wave?s force and moment on the base of platform are reduced through exponential relationship. The reductions are due to the effective depth that is equal to half the wave length. The results suggest that the response of the rocking motion of gravity platform shows significant changes in relation to height and wavelength. Based on the curves fitted to the data of the fluctuation angle, sustainability of the platform in the rocking motion can be thoroughly and completely investigated.

 Artículos similares

       
 
Jiaqi Hu, Yin Gu, Jinhuang Yan, Ying Sun and Xinyi Huang    
With the convenient and fast requirements for construction in bridge engineering, prefabricated assembly technology is widely applied in engineering construction. Typically, prefabricated bridge decks are connected through cast-in-place wet joints. Wet j... ver más
Revista: Applied Sciences

 
Omer Faruk Can, Nevin Celik, Filiz Ozgen, Celal Kistak and Ali Taskiran    
In this study, a numerical and experimental analysis of a solar collector with roughness elements in the form of stainless-steel scourers on the absorber surface is presented. According to the location type and number of the stainless steel scourers, the... ver más
Revista: Applied Sciences

 
Iurii Vakaliuk, Silke Scheerer and Manfred Curbach    
In the case of solid slabs made from reinforced concrete that are usually subjected to bending, large areas of the structure are stressed well below their load-bearing capacity or remain stress-free. Contrary to this are shell structures, which can bridg... ver más
Revista: Applied Sciences

 
Young-Cheol Kim, Dong-Hyeop Kim and Sang-Woo Kim    
To achieve the commercialization of electric vertical takeoff and landing (eVTOL) aircrafts, which have recently garnered attention as the next-generation means of transportation, objective certification based on rigorous procedures is essential. With th... ver más
Revista: Aerospace

 
Mengxiang Li, Guo Wang, Kun Liu, Yue Lu and Jiaxia Wang    
The safety assessment of ship cargo securing systems is of significant importance in preventing casualties, vessel instability, and economic losses resulting from the failure of securing systems during transportation in adverse sea conditions. In this st... ver más