|
|
|
Sahar Fatima, Muhammad Imran, Farah Kanwal, Ayesha Javaid, Shoomaila Latif and Grzegorz Boczkaj
In this work, polymeric microspheres derived from polystyrene-co-methyl methacrylate embedded with magnetic ZnO nanoparticles (poly(styrene-co-MMA)-3MPS-Fe (ZnO)) were synthesized using the suspension polymerization method. The surfaces of polymeric Fe(Z...
ver más
|
|
|
|
|
|
Seyedsaleh Mousavinezhad, Judit M. Garcia, William K. Toledo and Craig M. Newtson
For several decades, class F fly ash has been an attractive supplementary cementitious material, at least in part, due to its ability to reduce Portland cement consumption and mitigate alkali-silica reactions in concrete. However, fly ash availability is...
ver más
|
|
|
|
|
|
Matteo Di Virgilio, Andrea Basso Peressut, Valeria Arosio, Alessandro Arrigoni, Saverio Latorrata and Giovanni Dotelli
Despite being the most employed polymer electrolyte for proton exchange membrane fuel cells (PEMFCs), Nafion® has several limitations: expensiveness, poor performance when exposed to temperatures higher than 80 °C, and its potential as a source of enviro...
ver más
|
|
|
|
|
|
Ruiping Liu, Fei Liu, Youning Xu, Hua Zhu, Jiangang Jiao and Refaey M. El-Wardany
Fluoride (F) is an essential element of drinking water for human health, especially for bone development and enamel creation. However, if the fluoride content in drinking water is higher than 1.5 mg/L or lower than 0.5 mg/L, it will cause endemic disease...
ver más
|
|
|
|
|
|
Navaratnarajah Kuganathan, Raveena Sukumar and Poobalasuntharam Iyngaran
There is a growing interest in finding a suitable electrolyte material for the construction of rechargeable Li-ion batteries. Li2NiGe3O8 is a material of interest with modest Li-ionic conductivity. The atomistic simulation technique was applied to unders...
ver más
|
|
|